4.7 Installing and Removing PC Cards
The VisionPlate supports one Type I or Type II PC card.
4.7.1 Installing a PC Card
To install a PC card, do the following:
1. Open the cover of the PC card slot.
2. Insert the PC card into the slot.
4.7.2 Removing a PC Card
You can remove a PC card only when the card is in Stop status.
To remove a PC card, do the following:
Caution: You can cause damage to the PC card if you remove the PC card while the VisionPlate is
in use.
1. Using the stylus, tap the Card Removal icon
following window will appear.
on the task bar Notification area. The
Hitachi VisionPlate User Manual
47