2.3 Mobile Use
The VisionPlate comes with a lithium ion battery pack that can be used for mobile applications.
When your VisionPlate is powered on with the battery pack installed for the first time, an AC
adapter must be plugged in to fully charge the battery.
To install the battery in your VisionPlate, do the following:
1. Remove the two screws on the back side of the unit and then remove the battery cover, as
shown in the following illustration:
2. Insert the battery into the VisionPlate, as shown in the following illustration:
Note: When you remove the battery, slide the lock according to the directional arrow.
Chapter
20
2