Adjusting The Brightness Of The Lcd - Hitachi VisionPlate User Manual

2. Tap the center of the + mark, as shown in the following illustration. Repeat this step one or
more times after the + mark moves from the top left of the screen to the bottom right of the
screen.
Tap here
Note: If the calibration tool cannot be accessed using the stylus, due to excessive calibration
offset, a USB mouse can be used instead of the stylus to access the calibration tool.

3.2 Adjusting the Brightness of the LCD

To adjust the brightness of the LCD screen, do the following:
Using the stylus, tap the Menu icon , tap Settings, then tap Brightness, as shown in the
following illustration:
2. Move the slide bar to adjust the brightness.
3. Tap OK.
Hitachi VisionPlate User Manual
29