Initialization Method; Initializing The Controller; Initializing The Hivertec Ethercat Slave For Motion Control - Omron NJ-series Connection Manual

Machine automation controller

Hide thumbs Also See for NJ-series:

Table of Contents

8. Initialization Method

This document explains the setting procedure from the factory default setting.

Some settings may not be applicable as described in this document unless you use the

devices with the factory default setting.

To initialize the settings of the Controller, select Clear All Memory from the Controller Menu of

the Sysmac Studio. The Clear All Memory Dialog Box is displayed. Check the contents and

click the OK Button.

For how to initialize the Hivertec EtherCAT Slave for Motion Control, refer to EtherCAT Motion

Slave EtherCAT series HES-C400 HES-M400 User's Manual <Software>.

8．Initialization Method

Table of Contents