Installing The Power-Over Ethernet (Poe) Unit; Poe Unit Specifications - Motorola AP-7161 Installation Manual

28

Installing the Power-Over Ethernet (PoE) Unit

The AP-7161 can be powered by a standalone Gigabit PoE injector or from a Motorola Solutions LAN controller. A standard
CAT5E cable can be used to provide the connection. When connecting to the GE1/POE port on the AP-7161, you must use the
weatherproof RJ-45 plug kit that comes with the unit and it must be properly installed to maintain a weatherproof seal.
The recommended Power-Over Ethernet (PoE) device for AP-7161 outdoor deployments.is the PowerDsine 9001GO, 1-Port
802.3at Gigabit device. If the recommended Motorola Solutions outdoor Gigabit PoE injector is used, a weatherproof plug is
provided for connecting the CAT5E cables. The port labeled DATA PWR OUT is used for the connection to the AP-7161. The
port labeled DATA IN is used for the connection to the wired network. If the CAT5E cable used to connect the wired network and
the PoE injector has to travel though a building egress, a suitable lightning protection system must be deployed (see
Grounding Connection on page
The device injects power over data-carrying Ethernet cabling. It maintains the IEEE802.3at and IEEE802.3af standard. These
power levels allow usage by a new range of Ethernet-based applications, such as video phones, 802.11n access points, WiMAX
Transmitters, PTZ cameras and more. The PD-9001GO DATA PWR OUT port is designed to carry Gigabit Ethernet data &
power over a standard CAT5E cable, delivered through 2-pairs (Alt B: pins 4,5 (+) and 7,8 (-)).
The DATA IN and DATA PWR OUT ports on the recommended Power-Over Ethernet (PoE) device for AP-7161 outdoor
deployments are shielded RJ45 data sockets. They cannot be used as plain old telephone service (POTS) telephone sockets.
Only RJ45 data connectors can be connected to these sockets.

PoE Unit Specifications

Parameter
Input Voltage
Input Current
Maximum Available Output Power
11).
AP-7161 Access Point Installation Guide
Description
100-240 VAC (50-60 Hz)
1 Ampere (maximum)
30 Watts
AP-7161