Motorola AP-7161 Installation Manual page 18

18
Tighten all hex flange screws to 9 inch pounds (lbf-in).
8.
For poles greater than 3 inches in diameter:
Attach SKJC120210-003 to the pole using band clamps.
1•
Using a torque wrench or a ratchet and a 10mm socket, attach (but don't tighten) SKJC120210-001 to the access point with
2.
four M6 hex flange screws.
Attach SKJC120210-002 to SKJC120210-003 using two 1/2 inch bolts and nuts. Tighten the nuts to 70 inch pounds (lbf-in).
3.
AP-7161 Access Point Installation Guide