Wavion WBS-2400 SCT 120 User Manual page 70

Managing System and Station Security
Table- 5.3
Field
Encryption
Exclude Unencrypted
Related VLANs
VLAN: VLAN-
0_Name_External-ID-1
Rename VLAN
VLAN External ID
VLAN Enabled
Ethernet Tagging Enabled
Default for SSID
Options
Apply
Save (from the menu)
Cancel
Rev 3.1
Editing SSID Page
Description
WPA2 mixed mode PSK
WPA2 mixed mode Radius
WPA2 mixed mode PSK + Radius
None
WEP/40
WEP/104
TKIP
TKIP+WEP/40
TKIP+WEP/104
AES
AES + TKIP
When this checkbox is marked, the BST excludes incoming
packets that are unencrypted.
Default VLAN name
Option to rename VLAN name for identification.
Configured VLAN number as configured on the backhaul LAN
switch
Enabled for the Primary SSID. Configurable for additional VLAN
and SSID
Indicates whether 802.1q tagging is applied for this VLAN when
used on the Ethernet interface.
In case there are few VLANs per SSID (applicable when the SSID
is RADIUS Authenticated, and the RADIUS can determine which
VLAN a client belong to), this marks which VLAN is the default
VLAN for the SSID.
Click to have your changes take effect temporarily
Click to have your changes remain in effect after a reboot
Click to clear your changes; this is only possible if Apply or Save
were not clicked
User Manual 70