Viewing Associated Stations - Wavion WBS-2400 SCT 120 User Manual

Viewing Associated Stations

You can view a summary list of associated stations and their parameters
To view a summary list of stations and parameters
1.1. Click Association on the menu.
Click Associated Stations on the menu bar or on the summary screen
The Associated Stations page is displayed.
Figure 4.2
The following fields appear on the Associated Stations page:
Table- 4.2
Field
Title
Station's MAC Address
Power Save State
WMM support
Tx Rate [Mbps]
Rx Rate [Mbps]
SSID
VLAN
Tx[Bytes]
53 Wavion
Associated Stations Page
Associated Stations of VLANS page
Description
MAC (Media Access Control) address of the associated station
Value of Doze in this field indicates that the associated station
is in power save mode
Value of 'yes' in this field indicates that the associated station
supports the WMM protocol. . For more information about
working with QoS please refer to
PHY Rate (modulation) at which the base station currently
transmits to the associated station
PHY Rate (modulation) at which the associated station
currently transmits to the base station
SSID to which the associated station is associated
VLAN name to which the station is bound.
Number of bytes transmitted by BST to the station
Viewing Associated Stations
"QOS in WBS-2400"