Wavion WBS-2400 SCT 120 User Manual page 19

Figure 2.3 Default Popup
The system returns to the default software version and default IP and mask settings.
Note:
located in the connection's box. Press the button firmly until the "STATUS"
LED blinks fast with red light (around 40 seconds).
The configuration will revert to default.
Upgrading the Software Version
A full description of upgrading the software version is given in upgrading the System Software
section in Chapter 7.
Backing Up the Current Software Version
You can backup the software version currently installed on the system. This can be used before
upgrading to a new version with which you do not have experience.
To back up the current version of the software
• Click Backup.
The current version of the software is saved, and can be restored to the system if necessary.
Restoring the Last Saved Software Version
19 Wavion
Is possible to return to factory defaults using the reset pushbutton
Managing the System Configuration