Bridge - Wavion WBS-2400 SCT 120 User Manual

Managing Network Interfaces
How to return to Operational Mode:
The system will automatically return to operational mode with the previous selected channel
after the scanning.
During any time in which the system is not in operational mode, selecting channel from
"Operational channel" list-box and pressing reboot will return the system to operational mode
with the selected channel. Note that such operation is possible only on the Central BST (that
still has Ethernet backhaul. However, if the operational channel of the central BST changes,
make sure the same channel is selected on the remote BST (can be done if you wirelessly
connect to the remote BST).

Bridge

Traffic Policing
The system has a mechanism that allows the user to set the maximum bandwidth used by
broadcast and multicast messages. The policing of traffic also allows blocking any kind of peer-
to-peer data transaction- unicast or multicast.
Figure 3.12 Traffic Policing page
Field
Multicast Traffic Policing
Wireless multicast rate limitation
Ethernet multicast rate limitation
Rev 3.1
Description
Disable: No limitation on the bandwidth allowed
•
for multicast/broadcast messages in the wireless
interface
Enable: The bandwidth allowed for
•
multicast/broadcast messages in the wireless
interface is limited to the rate stated in the field
"Rate"
Disable: No limitation on the bandwidth allowed
•
for multicast/broadcast messages in the Ethernet
interface
User Manual 48