Wavion WBS-2400 SCT 120 User Manual page 43

Scan in Central (Central-Scan)
Central-Scan will help user select Remote units per Central. A configuration update of the C-BST
should be done by adding the new remote MAC address in order to enable Self Backhaul link
with it. In order to ease this process and avoid MAC address typing error, the ability to adopt
the MAC address from a list of BSTs that the C-BST detects in its channel is added.
Scanning for BSTs in the operational channel will be done when the BST is in operational mode.
The Central-scan will be triggered by the user by pressing a button in Self Backhaul page.
Every beacon from new BST that will be received during the scan period will be added to the
list.
Cluster deployment in steps:
Step 1:
Configure the same passphrase to all Cluster BSTs- Please refer to the configuration steps (
pages 41-44).
Step 2:
Install Central BST
Run ACS on Central BST to select the best channel
Set Channel
Step 3:
Install Remote-BST
Run Remote-Scan
Select the desired Central BST by click on entry in table.
Remote 1 will reboot in the desired channel with proper configuration
Step 4:
Execute Central-Scan and add Remote units to Central-BST
43 Wavion
Note
: During remote-scan, the access to the remote unit is not
possible. (unless there is a cable connection).
Managing Network Interfaces