Wavion WBS-2400 SCT 120 User Manual page 100

Upgrading the System Software
Figure 7.3 System Software
Performing Software Upgrades using HTTP
The Software Upgrade option shows details about the current software version, and allows you
to set properties required to install a new software version.
Other options:
1. Return to the factory default software
2. Backup the current version of the software
3. Return to a previously backed up version of the software.
Step 1: Set the Upgrade properties
Select the HTTP on the Software upgrade protocol.
Browse to the location of the firmware file.
Step 2: Upload the new firmware file
Press the Upgrade button.
Confirm the operation and wait for Web page to change to "Reboot the system" option.
Rev 3.1
100
User Manual