Wavion WBS-2400 SCT 120 User Manual page 47

Table- 3.8
Field
Connected BSTs
MAC Address
Operational Rate
Tx Bytes
Rx Bytes
RSSI
Details
W
connection between units.
How to initiate Channel Scan in Self Backhaul Mode:
Pressing scan button in the ACS page will initiate the scan process. During the process, the
system will reboot to Scan Mode, perform the scan and afterwards will automatically reboot
back to Operational Mode.
During scan mode the system will not be in operation, i.e. client will not be able to associate,
although beacons will continue to be transmitted.
47 Wavion
Connected BST
Description
MAC Address of the peer BST.
The Operational rate of the data transmitted to Peer BST on the
SBH link.
Amount of bytes transmitted
Amount of bytes received
The symmetrical Rx Signal Level of the link
Details of the Connected BST
Note:
To avoid Network loops, make sure there is no wired Ethernet
connectivity to the remote BST that closes a loop with the Ethernet
connectivity to the Central BST.
Note: All BST in the same cluster must be configured to the same
channel.
Note: Range in all cluster should be the same
Note: PtMP SBH Operation indicator in all cluster should be the same
:
ARNING Do not connect between two Central BST; this may lead to loose the
Managing Network Interfaces