Mercury 150 Operation, Maintenance And Installation Manual page 102

2. Connect the remote oil hoses to the engine hose connections. Fasten
hose connections with cable ties.
b
a
SPEEDOMETER AND WATER PRESSURE TUBING CONNECTIONS
NOTE: This applies to models without SmartCraft gauges.
This outboard has a speedometer water pickup located in the leading edge of
the gearcase. If you want to use this water pickup for the speedometer,
disconnect the water pickup tubing from the speedometer sensor and route
tubing out of the cowl. Install coupler (provided with outboard) on end of tubing.
OUTBOARD INSTALLATION
c
e
a -
b -
c -
d -
e -
d
3767
92
Hose clamp
Cable tie
Oil hose without blue
stripe
Oil hose with blue
stripe
Remote fuel hose
eng