Mercury 150 Operation, Maintenance And Installation Manual page 66

• Propeller shaft ‑ Refer to Propeller Replacement for removal and
installation of the propeller. Coat the entire propeller shaft with
lubricant to prevent the propeller hub from corroding and seizing to the
shaft.
3. Lubricate the following with 2‑4‑C with PTFE.
Tube Ref
Description
No.
2-4-C with PTFE
95
• Alternator belt tensioner pivot shaft ‑ Lubricate through the fitting.
• Swivel bracket ‑ Lubricate through the fitting.
• Tilt support lever ‑ Lubricate through the fitting.
27873
MAINTENANCE
Alternator belt tensioner pivot shaft,
swivel bracket, tilt support lever, tilt
a - Swivel bracket
b - Tilt support lever
a
b
26902
Where Used
tube, steering cable
29399
56
Part No.
92-802859A 1
eng