Shift And Throttle Cable - Mercury 150 Operation, Maintenance And Installation Manual

OUTBOARD INSTALLATION
Make the water pressure gauge hose connection to this tubing as follows:
c
e
d
a - Speedometer water pickup tube
b - Water pressure tube
c - Coupler
d - Plug
e - Barb hose fitting
f - Speedometer hose
g - Water pressure tube

Shift and Throttle Cable

COUNTERROTATION OUTBOARDS
Counterrotating (left‑hand) gearcases can be identified by a "L" stamped into
the end of the propeller shaft.
The Quicksilver Dual Engine Console Mount Control is required to shift the
counterrotation outboard. The installation instructions shipped with the control
explain the procedure required to connect this control to a counterrotation
outboard.
IMPORTANT: If the counterrotation outboard is rigged similar to a standard
rotation outboard OR if a standard rotation outboard is rigged similar to a
counterrotation outboard, the reverse gear and bearing in the gearcase must
function as forward gear. The reverse gear/bearing is not designed to carry the
sustained loads that are generated when running under constant high RPM and
thrust conditions.
eng
a
b
g
f
93
7728