Table of Contents
Advertisement
RT601HS_WV_EN.book 73 ページ ２００５年８月３日 水曜日 午後３時３１分
WV_EN.book 71 ページ ２００５年８月３日 水曜日 午後３時３１分
Displaying information on-screen
Various information can be displayed on-screen when in
VHS mode.
layback and recording
1
If necessary, load tape for recording.
2
Use the REC MODE button to select the recording
mode.
See page Recording modes and maximum recording
imes on page 71 for more on this.
r 8
3
Press TV DIRECT REC to start recording.
f you want to set a recording time, press the ì REC
button repeatedly. The recording time increases in 30
•
Press DISPLAY to display information on-screen
minute increments, up to a maximum of six hours. You
while a tape is playing, or while watching TV from
an see the recording time on-screen and in the front
the built-in TV tuner.
panel display. When the recording ends, the recorder
utomatically switches into standby if no other operation
VHS tape
s being performed.
and playback is possible with VHS and HQ
• To cancel the set recording time, press ì REC .
Time
• If you want to pause recording at any time, press
Audio type
only video tapes that bear the following logo:
(Stereo/Bilingual)
PAUSE . Press again to restart the recording.
4
To stop the recording, press F STOP REC.
• If you set the recording time in step 3 , you can still
PAL SECAM
stop the recording anytime by pressing F STOP REC .
• Recording will stop automatically at the end of the
d SECAM tape playback
tape.
SECAM and MESECAM tape playback is
owever, please note the following:
Audio type
Tip
(HI-FI/Stereo)
ecify the color standard as Auto , PAL or
• You can press TV DIRECT REC while the recorder is
nerally, the color standard should be set to
in standby to switch on and immediately start
nput Colour System on page 111 and Colour
recording.
ings for VHS on page 116).
• Please note that you can't record from another
g a pre-recorded NTSC video tape, the
component (VCR, etc.) that is connected by a SCART
TV set must be compatible with 60 Hz vertical
cable to the AV2/(INPUT 1/DECODER) connector
sometimes this feature is known as
Notes on playback/recording
using the TV Direct Recording feature.
), otherwise the picture will appear to roll
• You can't record to VHS while playing from HDD or
TSC tapes recorded in EP mode will not play
DVD.
.
• It is not possible to set timer recordings to record to
apes recorded with a mix of PAL, NTSC and
VHS.
grams will not play correctly on this unit.
• For how to copy from HDD or DVD to VHS see page
Copying between VHS and DVD/HDD on page 86.
g modes and maximum recording
• While in VHS mode, if you press HOME MENU,
GUIDE or TIMER REC, the recorder will automatically
end using E180 tapes or shorter.
switch to HDD.
• To protect a recording on tape from accidental
VHS tape length
erasure, use a screwdriver or similar to break off the
E240
E180
E90
erase-protect tab. If you want to record over the tape
d) 4 hrs.
3 hrs.
1 hr.
at a later date, cover the hole with Scotch tape.
30 mins.
8 hrs.
6 hrs.
3 hrs.
a tape
he tape into the slot until you feel it being
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
ush a tape in when the power is off, the power
DISPLAY
Ejecting a tape
Day
Pr 1
8:47 MON
NICAM ST
•
Press the
Once the tape has been ejected, remove it from the tape
00 : 00 : 00 SP
loading slot.
(SP/LP)
• If the tape should get caught in the mechanism and
Tape counter
fail to eject, please take the unit to your nearest
Pioneer authorized service center.
8:30 MON
HI-FI
Playing a tape
00 : 15 : 12 SP
E60
E30
1 hr.
30 mins.
1
Select VHS.
2 hrs.
1 hr.
• The front panel VHS indicator lights green when VHS
is selected.
2
Load a tape.
• If the erase-protect tab has been removed then
playback will begin automatically.
3
Press
Other VHS playback features
The table below shows additional playback controls for
VHS tapes.
During playback – Press to start reverse/
REV SCAN
FWD SCAN
forward scanning. Press again to change
the scan speed. The scan speed depends
on the recording mode.
Each press of
scan speeds.
• To resume normal playback, press
PLAY .
While stopped – Press to start reverse/
forward winding.
Channel preset
VHS
EJECT
• To stop winding, press
• To start scanning, press and hold
.
VHS EJECT button (front panel only).
Recording mode
During playback – Press to start slow
STEP/SLOW
motion playback.
• To resume normal playback, press
PLAY or
While play-paused – Press to advance one
frame.
Playback
operation
• To resume normal playback, press
PLAY or
Press during playback to skip forward on
SKIP
Tape
the tape. Press repeatedly to increase the
skip time: 30 sec. – 1:00 min. – 1:30 min. –
2:00 min. – 3:00 min. – 5:00 min. – 10:00
VHS
min.
Press to switch the audio channel for
AUDIO
bilingual and stereo programs during
playback.
Bilingual : Main & Sub – Main – Sub –
Main
Stereo : Stereo – Left – Right – Mono
Note
PLAY
• There is no sound when scanning or during slow
motion playback.
PAUSE
STOP
• You may notice picture noise when scanning or
during slow motion playback. This is normal.
• After about 5 min. of scanning, paused playback,
slow motion playback or frame advance, normal
playback will resume in order to avoid undue wear on
the tape and tape head.
PLAY to start playback.
or
alternates the
STOP .
.
PAUSE .
TRK
08
or
En
Advertisement
Table of Contents
