Typical Matrox Mxo2 Rack Connections; Analog Component Video Connections - Matrox MXO2 Installation And User Manual

28

Typical Matrox MXO2 Rack connections

In the following typical connection examples, we've connected a monitor to view
the signal that will be recorded, and separate source and record decks. You may,
however, use the same deck as both your source and record device by making the
input and output connections to a single deck. For details on the Matrox MXO2
Rack connectors, see

Analog component video connections

In this illustration, we're using analog component connectors for video, XLR
connectors for audio, and an HDMI connector for video monitoring. The video is
genlocked using a tri-level sync generator.
MXO2 Rack (partial view)
MXO2 Rack (partial view)
Tri-level
sync
generator
Chapter 4, Connecting External Devices to Matrox MXO2 Rack
Appendix B, "Matrox MXO2
Recorder (Deck 2)
Connectors."
HDMI
monitor
To another device's
reference input. If
not used, terminate
the signal with a
BNC 75-ohm
terminator.
Source
(Deck 1)