Note About Using Sleep And Hibernation Modes With Mxo2; Removing Your Matrox Mxo2 Software - Matrox MXO2 Installation And User Manual

Note about using sleep and hibernation modes
with
MXO2
Before setting your computer to sleep or hibernation mode, make sure that you
first quit any application that is using your Matrox MXO2 hardware, such as
Matrox A/V Tools. As well, never disconnect or remove your Matrox MXO2
hardware when your computer is in sleep or hibernation mode (always shut down
your computer first).

Removing your Matrox MXO2 software

You can remove the various Matrox MXO2 software components as follows:
• To remove Matrox Mtx.utils from your computer, choose
Programs > Matrox Mtx.utils > Uninstall Matrox Mtx.utils
• To remove the Matrox effect patterns from your computer, choose
All Programs > Matrox Effect Patterns > Uninstall Matrox Effect
Patterns
.
• To remove the Matrox VFW software codecs from a computer without
Matrox Mtx.utils, choose
Software Codecs > Uninstall Matrox VFW Software Codecs

Note about using sleep and hibernation modes with MXO2

Start > All Programs > Matrox VFW
11
Start > All
.
Start >
.