Matrox MXO2 Installation And User Manual page 191

Under Main Output
4
you want for your main and secondary outputs from MXO2. Depending on
the editing video format you chose in the
be able to change some of the settings.
Format Use this to select the video format you want for your outputs.
$
Be aware that the format you select may not be supported on all the
MXO2 outputs. For a list of the supported formats, see
Adobe Premiere Pro, Matrox A/V Tools, and Matrox WYSIWYG"
page 272.
Pulldown Method
$
method you want to be applied to your video output (
Advanced 2:3:3:2
rate and the current video output format, a pulldown method may
automatically be selected.
Aspect Ratio Conversion
$
video to be output when upscaling or downscaling:
•
16x9 Letterbox
mode by adding black bars at the top and bottom of the picture for
display on a standard 4:3 television screen.
•
4x3 Pillarbox
adding black bars to the left and right sides of the picture for display on
a widescreen 16:9 television screen.
•
Anamorphic
compressed 4:3 video, which retains the picture's full vertical
resolution for display on a widescreen television. To display the video
with the correct proportions on an NTSC or PAL monitor, select the
16:9 display setting on the monitor.
•
Center Cut
the left and right sides of the picture for display on a standard 4:3
television screen.
• Center Zoom
the top and bottom edges of the picture for display on a widescreen
16:9 television screen.
¦ Note
When aspect ratio conversion is applied to both the main and
secondary outputs, the same setting will be applied to both outputs.
Analog Output
5 Under
setup level, and output type:
Format Use this to specify whether you want the format for the analog
$
outputs to be the same as the main or secondary output.
and Secondary Output
Options
If this setting is available, select the pulldown
). Depending on your editing video format's frame
Use this to specify how you want your
Outputs the widescreen 16:9 picture in letterbox
Outputs the standard 4:3 picture in pillarbox mode by
Outputs the widescreen 16:9 picture as horizontally
Outputs the widescreen 16:9 picture by evenly cropping
Outputs the standard 4:3 picture by evenly cropping
, you can specify your analog output format, NTSC
, you can specify the settings
dialog box, you may not
"Playback using
Standard 2:3
Defining your A/V Tools options
171
on
or