Matrox MXO2 Installation And User Manual page 83

SDI , Composite
$
your SDI, composite, component, S-Video, or HDMI video source
connected to the video input on MXO2.
Remarks
•
The status of your genlock source will be displayed, such as
Not Locked
your selected genlock source. When you change the genlock source,
distorted video and silent audio will be output until MXO2 locks to the
new genlock source.
•
If MXO2 is unable to lock to your genlock source, it will automatically
lock to the internal reference. However, if MXO2 is unable to do this,
you'll need to manually set the genlock to
genlock source.
4 Under Genlock Video Format
format. When the genlock source is set to
is set to your main video output format.
¡ Important To ensure good output results, make sure that your genlock
source's video format is compatible with the MXO2 video output format.
Advanced Settings
5 Under
sliders to adjust the horizontal and vertical timing of your video outputs with
respect to your genlock source. This lets you compensate for cable delays
within your system.
6 Click OK to save your settings.
, Component , S-Video
, to indicate whether or not MXO2 is presently locked to
, select your external genlock source's video
Horizontal Delay
, drag the
, and HDMI Input Genlock to
Internal
or select a different
Internal
, the genlock video format
Vertical Delay
and
Defining your playback settings
63
Locked
or