Defining Your Capture Settings - Matrox MXO2 Installation And User Manual

66

Defining your capture settings

Matrox Capture Settings
The
capture material from any of your MXO2 system's video and audio inputs. The
settings available are based on your project's video format and your input source
(video is always captured to your project's video format). For a list of the
supported capture formats, see
and Capture
previewing your captured video, see
capture"
To capture video and audio on Matrox MXO2, make sure that your video input
and audio input sources in the
how to capture material using Avid Media Composer, see your Avid
documentation.
If you want to capture material using RS-422 device control, you can connect the
RS-422 connector on Matrox MXO2, MXO2 Rack, or MXO2 LE to the RS-422
serial device control port on your source device (see
connection"
"MXO2 LE RS-422 serial connection"
you must use a suitable adapter (RS-232 to RS-422 or USB to RS-422 adapter) to
connect the serial device control port on your source device to your
computer.When configuring your deck for RS-422 device control, the RS-422
connector on your MXO2 hardware is usually identified as the COM3 port.
° To specify your capture settings:
1 Do one of the following:
Click the
$
Video Input
Chapter 8, Using Matrox MXO2 with Avid Media Composer
dialog box provides settings that allow you to
Appendix C, "Matrox MXO2 Supported Input
Formats." For a list of the supported video output formats for
on page 278.
Capture
"MXO2 Rack RS-422 serial connection"
on page 18,
Settings tab in the
.
"Supported video output formats during
tool are set to Matrox
"MXO2 RS-422 serial
on page 36). On Matrox MXO2 Mini,
Project window, and then double-click
. For details on
on page 27, or