Installing Your Matrox Software; Before You Begin; Obtaining Matrox Powerdesk Software; Installing Your Matrox Powerdesk Software - Matrox TripleHead2Go Analog Edition User Manual

Installing your Matrox software

This section describes how to install Matrox software for Windows 7, Windows Vista, Windows Server
2008, Windows XP, Windows Server 2003, and Windows 2000.
You may need administrator rights to install certain software. For more information, see Windows
documentation or contact your system administrator.

Before you begin

If Matrox software is already installed on your system, you need to uninstall the software currently
installed.
Windows 7/Vista/XP/2000 – To uninstall Matrox software:
Windows 7/Vista –
Click
1
Matrox PowerDesk
your version and configuration of Windows, this part of the step may not be necessary.)
Restart your computer for the changes to take effect.
2
Windows XP/2000 –
Click
1
Matrox PowerDesk
Depending on your version and configuration of Windows, this part of the step may not
be necessary.)
Restart your computer for the changes to take effect.
2

Obtaining Matrox PowerDesk software

Matrox makes the latest display drivers available on the Matrox Technical Support Web site
(www.matrox.com/graphics/en/support/drivers).
*
Start Settings Control Panel
(or
Matrox PowerDesk-SE
*
Start Settings Control Panel
(or
Matrox PowerDesk-SE
*
Programs Programs and Features
) . (* Depending on
Uninstall Yes
Add/Remove Programs
)
Change/Remove
Matrox TripleHead2Go – User Guide 29
(double-click*)
. (*
Yes