Specifying Your Audio Output Settings - Matrox MXO2 Installation And User Manual

64

Specifying your audio output settings

The simultaneous audio outputs on your Matrox MXO2 hardware allow you to
send your audio to a variety of devices at the same time. Your Avid editing
application and Matrox provide various settings to configure your audio output
on MXO2.
° To specify your audio output settings:
1 Click the
Project
2 In the
your desired audio output settings as explained in your Avid documentation.
To map tracks directly to audio output channels on your Matrox hardware,
click the Mix Mode Selection button to select
output channel on MXO2 for each audio track in your sequence.
Remarks
The
$
For surround sound HDMI audio output, Matrox MXO2 supports the 5.1
$
and 7.1 SMPTE settings only.
Matrox MXO2 supports the
$
output level of your sequence. If needed, you can use the
(master attenuator) slider to adjust the overall output volume for all tracks.
3 Click the
then click the Hardware Setup (
Chapter 8, Using Matrox MXO2 with Avid Media Composer
Settings Project
tab in the
.
Audio Project Settings dialog box, click the
Allow 16 channel output
Hardware
tab in the
window, and then double-click
Output
Direct Out
option is not supported on MXO2.
Audio
tool so that you can monitor the global
Audio Project Settings
) button.
Audio
tab and specify
, and then select an
Output Gain
dialog box, and