C C
Figure 8.
A
B
C
NOTES:
Mounting the USB HUB4
The USB HUB4 can be mounted to a wall, on a rack, in furniture, or in an Extron
architectural product, such as a cable cubby or HSA. Recommended mount kits and
architectural product for the USB HUB4 are listed on the Extron website.
NOTES:
Wall or Furniture Mounting
The HUB4 can be attached to a wall, podium, or other flat surface with either a stud-
mounted wall box or with a wall mounting bracket (such as the Extron MR or MR D series).
Both types of installations require a double-spaced AAP or MAAP mounting frame (such as
the AAP 102 or the CPM101).
A A
ACTIVITY
ACTIVITY
USB HUB4 MAAP
HUB4 USB MAAP
A A
USB HUB4 MAAP Front Panel
USB hub connectors — Connect up to four USB peripheral devices (for example,
a keyboard, mouse, or Web cam) to these female USB A connectors. Each USB
port provides 100 mA of power when the HUB4 is powered via the host computer or
500 mA when it is powered by an Extron PS 1210 C 12 VDC external power supply
(see
figure 7
on the previous page and figure 8).
Activity LED — This LED lights when any peripheral device is enumerated (has been
recognized and has had communication established) by the USB host and is currently
communicating with it.
Power LED — This LED lights if the HUB4 is receiving power through either an external
power supply through the Power In port or the rear panel USB host connector.
•
If the host computer is providing power to the HUB4, the power LED on the front
panel illuminates only if the host PC is powered on.
•
If the HUB4 is powered by the optional Extron PS 1210 C 12 VDC power supply,
the LED illuminates regardless of whether or not the host computer is on.
•
The equipment is to be installed in Extron Listed products, which accept
Architectural Adapter Plates (AAPs) or Mini Architectural Adapter Plates (MAAPs) or
installed in a Listed two-gang junction box with provided faceplate.
•
Use an AAP or MAAP blank for any unused faceplate openings.
B B
USB HUB4 Series • Installation
9