Rack Mounting Procedure - Extron electronics USB HUB4 AAP User Manual

Rack mounting procedure

To mount the USB HUB4 directly to a rack or to a rack shelf,
1. Connect all cables to the rear panel of the HUB4.
2. Insert the HUB4 in one of the spaces in a rack space frame and attach it to the frame
using the provided hex screws and nuts (see figures 14 and 15).
3. Attach any desired additional AAP or MAAP devices to the rack space frame.
4. Attach the rack space frame to the rack shelf, using the provided screws.
5. If using a rack shelf, mount the shelf with the HUB4 attached, to the rack.
#4-40 Nut with
Captive Washer
AAP 301
Architectural Frame
Figure 14. Mounting a USB HUB4 AAP Directly to a Rack Using an AAP 301
Frame
RSB 126
Rack Mount Shelf
(2) #6 Screws
Figure 15. Mounting a USB HUB4 MAAP on a Rack Shelf Using a CPM133 Frame
0 1
P 3
A A
TI VI TY
AC
A P
4 A
U B
B H
U S
USB HUB4 AAP
USB HUB4 MAAP
TI VI TY
AC
P
A A
4 M
U B
B H
U S
(4) #4 - 40 Screws
CPM130
A/V Connector Frame
USB HUB4 Series • Installation
#10-32 Screw/
Nylon Captive
Cap Washer
14