Technical data ...............3 tally friendly, self regulating central heating boiler intended for heating of residential houses and production of domestic hot water using pellets. Standard equipment of the Ariterm Functional description ...........4 Biomatic+ 20 includes true lambda control, automatic heating circuit regulation, Safety and alarms ............4...
1N~, 50 Hz 1N~, 50 Hz Dimensions of Ariterm Biomatic+ and Biomatic 40i. Dimensions in parentheses specific dimension of Ariterm Biomatic+ 40i. Fuse size Standard model 9 kW immersion Standard model 9 kW immersion 1. Drain valve DN 15, internal thread 6.
FUNCTIONAL DESCRIPTION SAFETY AND ALARMS Heating with the Ariterm Biomatic+ 20 pellet heating unit is similar to oil heating in For safety reasons, the Biomatic+ 20 and fuel store must be placed apart from each many ways. The main difference is that heating with solid fuel produces a certain amount other to prevent possible damage.
Pellets are fed to the Safety zone against burner head from below Combustion fan Burner screw fire in the back (underfeeding principle) 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 5/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
The installation must always be carried out in accordance with, at the time being, valid local Before installing the boiler, the heating system must be flushed and checked by means standards and regulations, as well as the Ariterm Installation and Operation Instructions. of a water-pressure test. After installation, make sure that all joints are tight.
Brown Alarm relay Brown Tank sensor (top) Black Black Black Circulation pump Tank sensor (bottom) Fuse w. pump Black Black BM61011v1 140822 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 8/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
+12V Brown Alarm relay Brown Tank sensor (top) Black Black Fuse w. pump Circulation pump Tank sensor (bottom) Black Black 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 9/32 Installation and operating instruction • Version 2.0 • 12.04.2017 BM61021v1 140821...
Click at “Update”. Now you will access Ariterm Local Control of the boiler via the web interface and will be Repeat until the external feeder has fed a couple of liters of pellets into a bucket.
Press the burner control The picture shows 20 kW burner. switch for more than 10 seconds until the flue gas fan starts to pulse. 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 11/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
Page 12
You enter the control with Username/Password. Further information at The present operating mode of the burner, On or Off status of the burner, Sync status, ”Connecting to Ariterm web interface” under ”Start-up, Start and Stop”. Boiler temperature, Room temperature, Outdoor temperature, Estimated pellet level,...
Page 13
MENU STRUCTURE ARITERM LOCAL/PORTAL CONTROL Alarm Alarm: Manage emails In the “Alarm” menu you can see current alarms and are able to confirm them. In the ”Alarm: Manage emails” menu you can add receivers of alarm emails and You can also view and search the alarm history.
Page 14
MENU STRUCTURE ARITERM LOCAL/PORTAL CONTROL Settings: Main Settings: Maintenance In the ”Settings: Main” menu you are able to set the boiler start and stop temperatures In the ”Settings: Maintenance” menu you are able to set two different alarm timers. (40-90 ˚C) , desired room temperature and set the burner in On/Off mode.
Page 15
MENU STRUCTURE ARITERM LOCAL/PORTAL CONTROL Settings: Immersion heater Settings: Pellet Storage In the ”Settings: Immersion heater” menu you can set start and stop temperature of In the ”Settings: Pellet storage” menu you can manually force feed the external feed the immersion heater.
Page 16
MENU STRUCTURE ARITERM LOCAL/PORTAL CONTROL Settings: Tank mode Profile At ”Settings: Tank mode” you can activate Tank mode, set ”Boiler temperature limit” In the ”Profile” menu you can edit your profile.To be able to edit your profile you must and ”Tank pump start temperature”.
Page 17
In ”Network” menu you are able to scan and select local networks if to connect the boiler In the ”User” menu you can view all users of the boiler. to internet, changing from Ariterm Local Control (using the boiler integrated AP) to Ariterm Portal Control.
Page 18
MENU STRUCTURE ARITERM LOCAL/PORTAL CONTROL Users: Create user Schedule In the ”Users: Create user” menu you can add new users. You are not able to add users in In the ”Schedule” menu you can see what profile - ”Schedule”, ”Work”, ”Home” or a higher user level than your own.
HEAT CIRCUIT SETTINGS ARITERM LOCAL/PORTAL CONTROL Schedule (option): Work/Home Schedule (option): Schedule In ”Work” and ”Home” profiles you can set desired room temperatures during the day In the ”Schedule” profile you edit the weekly heating schedule defining what weekdays for days away from home ”Work”, or at home ”Home”. Profiles to be activated, either the boiler is to operate according to ”Work”...
CRB122 Shunt motor unit with Ariterm Local/Portal Control PWM pump For the first heating circuit the CRB122 unit operates together with the Ariterm Local/Portal Connect the PWM regulation cable to the fast connectors, blue on blue and brown on brown. (B) Control.
NOTE! The return temperature shall be regulated, with a thermic valve, to at least 60 ˚C. 11. Solar coil. 12. DHW cold inlet from mixing valve. 13. DHW warm outlet to mixing valve. 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 21/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
GUARANTEE AND DECOMMISSIONING MOST COMMON SPARE PARTS Guarantee Biomatic+ 20 spare part list Biomatic+ 40 spare part list For Warranty Issues Ariterm AB refers to our local Distributor. Product no. Description Product no. Description 5936 Thermal protection 5936 Thermal protection...
Make sure that the burner wires do not get damaged. 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 24/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
Page 25
Combustion chamber cleaning (as needed) Ash box emptying 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 25/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
Page 26
Repeat a couple of times. 9. Replace the Turbulator cover plates and 10. Replace the Convection cleaning hatch the Turbulator rocker. and fasten the start knobs. 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 26/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
Page 27
Repeat a couple of times. 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 27/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
Due to their small size, the pellets move freely in the feeding augers. NOTE! The Ariterm Biomatic + series boilers are suitable for burning pellets of diameters ranging from 6 mm through to 8 mm. The burner is factory set for 6 mm wood pellet.
The capacity of the storage is 450 liters and it’s filed by an integrated grid at the top. quietly feeds pellets from the silo. Ariterm Depo is designed to be used in combination The Ariterm PF450 may also be used as intermediate storage.
BeQuem 40, Ariterm Biomatic+ 40 Light with pellet burner BeQuem 40 and Ariterm Biomatic +40 Ultra-Light with pellet burner BeQuem 40 have been recommended for exemption under the Clean Air Act when burning wood pellets and operated in accordance with these instructions.
Blower % Auger % Flue gas temperature - Min Combustion efficiency Draught mm Auger % Blower % Dealer / Installer Installer Date 5P01781-A / 5P01781-B ARITERM AB • ARITERM OY 31/32 Installation and operating instruction • Version 2.0 • 12.04.2017...
Page 32
5P01781-A 5P01781-B ORGANISATION CERTIFIED BY Ariterm AB / Flottiljvägen 15 / 392 41 Kalmar / Sweden / +46 (0)480 442850 / info@ariterm.se / www.ariterm.se...
Need help?
Do you have a question about the Biomatic+ 20i/40 and is the answer not in the manual?
Questions and answers