Notes ..................24-26 Maintenance contract Installation Protocol...............27 Ariterm recommends the boiler installation to be made by a company with professio- nal competence. For more information please contact your Ariterm retailer. Replacing of spare parts Ariterm recommends that replacing of spare parts is made by authorized serviceman of Ariterm retailer.
OPERATING PRINCIPLE SAFETY AND ALARMS The Ariterm Bionet combines a compact pellet boiler with an Ariterm BeQuem The boiler is designed according to the same main principles as an oil heated system. combustion chamber into a single reliable and efficient unit. The convenience, envi-...
Boiler cement is suitable for sealing. Recommended flue gas requirements for Closed system: Bionet+ 12: brick chimney lined with a Ø 100 mm acid proof thin-walled tube or an Select the volume of the vessel in accordance with the manufacturer’ s instructions.
Sintering is caused by impurities in the pellet fuel and a claim should be sent to the supplier at once. THE BURNER CUP MUST BE CAREFULLY CLEANED TO For more information please refer to ”Advice about Fuel Pellets”. ENSURE FLAWLESS OPERATION. ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 10/28...
Fun must be in operation the desired end results. Adjustment is made with a flue gas analyser and should be before function of the carried out by a service technician authorised by Ariterm. Flue gas analysis shall be ignition element can be found.
(“desired temperature”), the burner redu- ces the power input to the burner in order to prevent shut down. If the lowest power input exceeds the building’ s requirements, the burner shuts off. ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 12/28...
Flashing: Warning light (does not switch off the burner) Browsing forward in the menu Reaching the menu Browsing backward in the menu level ”Service” Increases the set values Decreases the set values ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 13/28...
“forward” to the next screen, if you want to view the pellets store data. Displays the number of operating days at the avera- Estimated time left For information only. ge consumption level in question. ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 14/28...
Page 15
Is reset by pressing the Plus/Minus buttons si- Default set vXXXX Cold starts Displays the number of cold starts. les resetting the factory settings. the Plus button. multaneously for 3 seconds. ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 15/28...
ACTIONS CHART ACTIONS CHART Bionet+ 12 / BeQuem 12 version 0821 OPERATING TIME OPERATING TIME OPERATING TIME OPERATING TIME TOTAL ESTIMATED TIME PELLETS STORE FEEDING FAKTOR CONSUMPTION ALARM PELLETS CONSUMPTION AUGER EXTERNAL LEFT 0,0 t 0,0 kg/h AVERAGE 0,0 kg/d...
The feed opening of fuel must be loca- have been stuck in the silo. ted in the middle of the fuel store (app- lies to small week stores). ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 17/28...
Page 18
No and, when necessary, should be repla- fuel has entered into the combus- ced by an authorised technician. tion head. ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 18/28...
Ariterm Sweden AB reserves the right to decide the method how a possible guarantee over 600 kg/m 3 Volume weight repair is carried out. Ariterm Sweden AB is not liable for damages occurred after the Moisture content less than 10 % expiration of the guarantee period, but compensation for such incidents may be agreed upon separately case by case.
The Feedo is particularly appropriate in combination with the NOTE! Installation of PS300 / Feedo, see separate manuals for each product. Depo discharge chute. NOTE! Installation of Depo / Feedo, see separate manuals for each product. ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 20/28...
Page 21
FEEDING SYSTEM WEEKLY STORAGE ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 21/28...
Page 22
FEEDING SYSTEM DEPO / FEEDO ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 22/28...
Inst. date If these instructions are not followed during installation, operation and maintenance, the obligations of Ariterm AB under the warranty regulations are no longer binding. Ariterm reserves the right to alter any details and specifications without prior notice. ARITERM SWEDEN AB Installation, Operation &...
Page 28
ARITERM SWEDEN AB Installation, Operation & Maintenance - 2008.11.18- 28/28...
Need help?
Do you have a question about the Bionet+ 12 and is the answer not in the manual?
Questions and answers