INSTALLATION Space requirements Flue connection and combustion air opening Plumbing connections Safety vent installation...
Page 5
INSTALLATION Part Name Ariterm 35+ boiler 3-way valve, underfloor heating 3-way valve, radiator heating Heat supply pump, underfloor heating Heat supply pump, radiator heating Underfloor heating system manifold Radiator heating system Expansion vessel Service shut-off valve Safety vent Refill valve...
Page 6
INSTALLING THE TEMPERATURE LIMIT VALVE Installation TECHNICAL SPECIFICATIONS Max. input water pressure 10 bar Opening temperature Valve available from Ariterm Oy Product no. 5012921...
DIMENSIONS AND CONNECTIONS Without flue gas fan With flue gas fan Part Name Unit Part Name Unit Turning plate adjustor Fixed hatch for afterburning chamber Damper adjuster Boiler temperature sensor unit DN 20 Charging pump thermostat Water accumulator outlet DN 50 Water pressure gauge Water accumulator return DN 50...
Page 8
TECHNICAL SPECIFICATIONS / BOILER CROSS-SEC TION TECHNICAL SPECIFICATIONS Performance values: Power 20 - 40 kW Width 800 mm Depth 1109 mm Height 1300 mm Weight empty 690 kg Measurement data: Water capacity 150 L Storage chamber volume 120 L Burning time 37 kg / 3 h Size of refill opening 550x350 mm...
OPERATING PRINCIPLE Wood gasification Afterburning of gases Heat recovery...
Page 10
INSTALLATION OF THE GRATE AND CERAMIC COM- PONENTS 1. Lower brick 2. Lower part of side brick (2 pcs) 2. Lower part of side brick (2 pcs) 3. Lower part of front brick...
Page 11
INSTALLATION OF THE GRATE AND CERAMIC COM- PONENTS 3. Lower part of front brick 4. Lower part of rear brick 5. Upper part of rear brick 5. Upper part of rear brick 6. Upper part of front brick. The upper 6.
Page 12
INSTALLATION OF THE GRATE AND CERAMIC COM- PONENTS 6. Upper part of front brick. 7. Upper parts of side brick (2 pcs) (pay attention to left-or right-handedness). Remove the temporary support then instal- lation is complete. Installation of base bricks...
HEATING Lighting the boiler Turning plate handle afterburning Heating Lightning- and Driftläge Tänd- och position lling position chamber påfyllningsläge grate Damper handle Open Closed Öppen Stängt Pic 1 opening for bur- ning chamber Pic 2...
Page 15
HEATING Primary Air hatch Secondary Air hatch Refilling N.B. Fuel should only be refilled when the energy created can be stored in the accumulator tank or otherwise consumed. Boiling of the accumulator tank and boiler must be avoided.
SERVICE AND MAINTENANCE Cleaning N.B. The surface of the ash must never rise up to touch the grate. This prevents cooling of the grate and will rapidly result in damage. For this reason too, the holes in the grate must be open. Ensuring the tightness of the hatches...
Page 17
THE USE OF ALTERNATIVE FUELS Use of an oil burner Use of electricity Pellet use...
WARRANTY AND REMOVAL FROM USE Warranty Removal from use MOST COMMON SPARE PARTS Part number Name Additional information Quantity 13285 Grate 13611 Front brick lower 545x115x109 13612 Rear brick lower 545x126x88 Lower brick 446x255x50 13613 Side bricks lower part 50x150x275 13614 Side bricks upper part left 50x131x322...
Need help?
Do you have a question about the 35+ and is the answer not in the manual?
Questions and answers