Introduction To The Pointek Cls 300; Pointek Cls 300 Outputs; Pointek Cls 300 Features; Pointek Cls 300 Applications - Siemens POINTEK CLS 300 Instruction Manual

Introduction to the Pointek CLS 300

Note:
Pointek CLS 300 is to be used only in the manner outlined in this instruction manual.
The Pointek CLS 300 capacitance level switch provides output on high or low process
material levels. When the measured material is at the desired level, the change in
capacitance is sensed and a level alarm is triggered. This could be either a high level alarm
(material rising to reach the desired level) or a low level alarm (material falling to reach
desired level).

Pointek CLS 300 Outputs

•
One form C (SPDT) relay
•
One isolated, non-polarized, solid-state switch

Pointek CLS 300 Features

•
NPT, BSPT, JIS (other connections on request)
•
Corrosion resistant construction, PFA, Ceramic, and 316L stainless steel wetted
parts
•
25m (82 ft) maximum insertion length
•
Rugged shear and abrasion resistant probe
•
Fully adjustable process alarm: level, time delay
•
Field adjustable insert length
•
ESD protection to 55 kv continuous discharge
•
Active shield technology

Pointek CLS 300 Applications

•
Liquids, slurries, powders, granules, and solids
•
Chemical and petrochemical
•
High pressure and temperature
•
Power Industry (fly-ash)
Page 2 Pointek CLS 300 – INSTRUCTION MANUAL 7ML19985CK03