I.link Setup; Audio Out - Pioneer DV-668AV Operating Instructions Manual

08 Initial Settings menu
Automatic: Select Auto to start the test tone
output. No sound will be heard from the
subwoofer.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers

i.LINK Setup

As the test tone plays through each speaker in
turn, it is highlighted on-screen. Use the
Joystick (up/down) to adjust the channel
output level of the current speaker. Move the
cursor left to exit the test tone sequence, or
press ENTER to save the settings and exit the
Channel Level setting screen.
Manual: Use the Joystick to move the cursor
up/down to select a speaker.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Move the cursor right (or press ENTER) then
use the Joystick (up/down) to set the channel
output level.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
76
En
Auto
0.0dB
L
C 0.0dB
R 0.0dB
0.0dB
RS
0.0dB
LS
0.0dB
SW
Auto
L 0.0dB
0.0dB
C
0.0dB
R
0.0dB
RS
LS 0.0dB
SW 0.0dB
Auto
0.0dB
L
0.0dB
C
R 0.0dB
0.0dB
RS
0.0dB
LS
0.0dB
SW
To turn the test tone on/off for an individual
speaker, move the cursor right. The test tone
continues playing even when you select a
different speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language
0.0dB
C
0.0dB
R
Display
0.0dB
RS
Options
LS 0.0dB
Speakers
0.0dB
SW
i.LINK Setup
To save the settings and exit, press ENTER
with the channel level field highlighted (as
shown above).
• The subwoofer output will sound quite low
compared to the other speakers.
i.LINK Setup
(DV-868AVi only)

Audio Out

• Default setting: On
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Initial Settings
Digital Audio Out Audio Out
Video Output Connections Setup
Language Auto Select Play
Display DVD-Audio Out
Options
Speakers
i.LINK Setup
On
Off