Table of Contents
Advertisement
Getting Started
Basic playback controls
9
Using the on-screen displays
Switching on
Is your AV receiver MPEG compatible?
Select Compatible, Not Compatible or
The table below shows the basic controls on
For ease of use, this player makes extensive
After making sure that everything is con-
Don't Know.
the remote for playing discs. The folllowing
nected properly and that the player is
use of graphical on-screen displays (OSDs).
chapter covers more playback features in
You should get used to the way these work as
plugged in, press
more detail.
you'll need to use them when setting up the
front panel, or on the remote control to
Setup Navigator
player, using some of the playback features,
switch the player on.
Language Settings
Dolby Digital
such as program play, and when making
Also, switch on your TV and make sure that it
Button
What it does
Audio Out Settings
DTS
more advanced settings for audio and video.
AV Receiver Func.
MPEG
is set to the input you connected the DVD
3
Starts playback.
All the screens are navigated in basically the
player to.
DVD and Video CD/Super
same way, using the cursor buttons to
VCD: if the display shows
change the highlighted item and pressing
STANDBY/ON
RESUME, playback starts from
ENTER to select it.
the resume point.
10 Is your AV receiver compatible with
8
Pauses a disc that's playing,
96kHz Linear PCM audio?
STANDBY/ON
or restarts a paused disc.
Select Compatible, Not Compatible or
Don't Know.
• Throughout this manual, 'Select' means
7
Stops playback.
use the cursor buttons to highlight an
DVD and Video CD/Super
item on-screen, then press ENTER.
VCD: Display shows RESUME.
Setup Navigator
Press 7 (stop) again to cancel
• My DVD player switches on but there is
Language Settings
Dolby Digital
the resume function.
nothing displayed on my TV.
Audio Out Settings
DTS
AV Receiver Func.
MPEG
1
Press to start fast reverse
Make sure that the TV is set to the
96kHz Linear PCM
scanning. Press 3 (play) to
correct video input (not a TV channel).
resume normal playback.
For example, if you connected this
player to the VIDEO 1 inputs on your TV,
¡
Press to start fast forward
switch your TV to VIDEO 1.
scanning. Press 3 (play) to
11 Press ENTER to complete the setup, or
resume normal playback.
press SETUP to quit the Setup Navigator
GUIDE
SETUP
4
without making any changes.
Skips to the start of the
current track or chapter, then
• This player features a screen saver and
to previous tracks/chapters.
an auto power off function. If the player
Setup Navigator
is stopped and no button is pressed for
¢
Skips to the next track or
Language Settings
Dolby Digital
five minutes, the screen saver starts. If
chapter.
Audio Out Settings
DTS
Button
the disc tray is closed but no disc is
What it does
AV Receiver Func.
MPEG
96kHz Linear PCM
Numbers
Use to enter a title/track
playing and no control is pressed for 30
SETUP
Display/exit the on-screen
number. Press ENTER to select
minutes, the player automatically goes
display
(or wait a few seconds).
into standby.
Changes the highlighted
• If the disc is stopped, play-
Congratulations, setup is complete!
menu item
back starts from the selected
title (for DVD) or track number
ENTER
Selects the highlighted menu
(for CD/Video CD/Super VCD/
item (both ENTER buttons
MP3).
work in exactly the same way)
• If the disc is playing,
RETURN
Returns to the main menu
playback jumps to the start of
without saving changes
the selected chapter or track.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
STANDBY/ON on the
Compatible
Not Compatible
Don't Know
OPEN/
CLOSE
0
1
¡
3
4
¢
7
8
Compatible
Not Compatible
Don't Know
ENTER
ENTER
RETURN
RETURN
Compatible
Not Compatible
Settings complete
Unknown
Press ENTER to exit
ENTER
Front panel controls
Playing discs
Let's Get Started
The 3 (play), 7 (stop), and 8 (pause) buttons
When you switch on the player for the first
The basic playback controls for playing DVD,
• The button guide at the bottom of every
on the front panel work in exactly the same
time, you should see a welcome screen
CD, Video CD/Super VCD and MP3 discs are
way as their remote control equivalents. The
displayed on your TV. From here you can set
OSD screen shows you which buttons
covered here. Further functions are detailed
you'll need to use for that screen.
up the player to work with the kind of TV you
combined scan/skip buttons on the front
in the next chapter.
panel (4 1 and ¡ ¢) work slightly
have, then either use the Setup Navigator to
make more settings, or jump right in and
differently from the remote buttons.
Setting up with the Setup
start playing some discs.
Navigator
Using the Setup Navigator you can make a
STANDBY/ON
number of other initial settings for this
• For customers in Taiwan: The default on-
player. We recommend using the Setup
screen menu language is Traditional
Navigator, especially if you connected this
Press and hold for fast scan; press for track/
Chinese. Use the instructions below to
Î
player to an AV receiver for playing surround
chapter skip.
complete the Let's Get Started setup,
sound. To answer some of the questions
then see page 54 for instructions on
about digital audio formats you may need to
changing the on-screen display lan-
look at the instructions that came with your
guage to English.
AV receiver.
• You may find with some DVD discs that
some playback controls don't work in
If a disc is playing, press 7 (stop).
1
certain parts of the disc. This is not a
Also turn on your TV and make sure that it is
malfunction.
set to the correct video input.
• Track skip and number buttons for track
selection do not work with unfinalized
2
Press SETUP.
CD-R/RW discs.
The on-screen display (OSD) appears.
DVD-Video disc menus
Many DVD-Video discs contain menus from
Audio Settings
which you can select what you want to
watch. They may give access to additional
Play Mode
features, such as subtitle and audio lan-
guage selection, or special features such as
Initial Settings
1
If the player isn't already on, press
slideshows. See the disc packaging for
STANDBY/ON to switch it on.
details.
If you're playing a DVD or Video CD/Super
3
Select 'Setup Navigator'.
Sometimes DVD-Video menus are displayed
VCD, also turn on your TV and make sure
automatically when you start playback;
that it is set to the correct video input.
others only appear when you press MENU or
TOP MENU.
Press 0 OPEN/CLOSE to open the disc
2
Audio Settings
tray.
Play Mode
Initial Settings
¡
1
4
¢
7
STANDBY/ON
OPEN/CLOSE
0
4 1
¡ ¢
1
2
3
4
5
6
ENTER
7
8
9
0
ENTER
1
3
¡
ENTER
4
8
7
¢
GUIDE
RETURN
Disc Navigator
Setup Navigator
Disc Navigator
Setup Navigator
04
OPEN/
CLOSE
0
3
8
19
En
En
En
En
Advertisement
Table of Contents
