Mpeg Out; Video Output Settings; Tv Screen; Component Out - Pioneer DV-668AV Operating Instructions Manual

08 Initial Settings menu
• When an HDMI component is connected,
the setting is automatically fixed to Down
Sample Off. However, 96kHz sources will
still be downsampled to 48kHz.

MPEG Out

• Default setting: MPEG > PCM
You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
If your AV receiver (or other connected
component) is compatible with MPEG audio,
set this to MPEG, otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio). Check the manual
that came with the other component if you're
unsure whether it is MPEG audio compatible.

Video Output settings

TV Screen

• Default setting: 16:9 (Wide)
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
62
En
Digital Out MPEG
Dolby Digital Out MPEG > PCM
DTS Out
Linear PCM Out
MPEG Out
4:3 (Letter Box)
TV Screen
4:3 (Pan&Scan)

Component Out

16:9 (Wide)
AV Connector Out
16:9 (Compressed)
S-Video Out
Still Picture
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
When set to 16:9(Compressed), progressive-
scan 4:3 material is shown with black bars on
either side of the screen.
If you have a conventional TV, select either 4:3
(Letter Box) or 4:3 (Pan&Scan). In Letter Box
mode, widescreen software is shown with
black bars at the top and bottom of the
screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you're actually seeing
less of the picture). See also Screen sizes and
disc formats on page 81.
• You can't change the video output setting
when an HDMI component is connected.
Component Out
• Default setting: Interlace
You only need to make this setting if you
connected this player to your TV using the
component video outputs.
Initial Settings
Digital Audio Out
TV Screen
Video Output
Component Out
Language
AV Connector Out
Display
S-Video Out
Options
Still Picture
Speakers
i.LINK Setup
If you have a progressive-scan compatible TV,
set this to Progressive for flicker-free video
output. If your TV is not compatible with
progressive-scan video, set to Interlace.
Check the operating instructions that came
with your TV if you're unsure about its
compatibility.
Progressive
Interlace