Cd Playback; Dts Downmix; Speakers; Audio Output Mode - Pioneer DV-668AV Operating Instructions Manual

Pioneer corporation dvd player operating instructions manual dv-868avi, dv-668av
Table of Contents

Advertisement

Initial Settings menu
• It is not possible to output SACD, or copy-
controlled DVD-Audio CPPM sources
from the HDMI connection.
• 96/192 kHz sources are downsampled to
48 kHz and 88.2/176.4 kHz sources are
downsampled to 44.1 kHz.

CD Playback

• Default setting: PCM Playback
Initial Settings
Digital Audio Out
CD Playback
Video Output

DTS Downmix

Language
Display
Options

Speakers

i.LINK Setup
When set to PCM Playback, playback is
optimized for standard audio CDs. You can
also play DTS CDs, however you may notice
some noise when a DTS CD starts playing.
This is not a malfunction.
When set to DTS CD Playback, playback is
optimized for DTS CDs. In this mode you
cannot play standard audio CDs through the
analog outputs. Change the setting back to
PCM Playback to play standard CDs.
The i.LINK audio output (DV-868AVi only) is
not affected by this setting.
DTS Downmix
• Default setting: Stereo
Initial Settings
Digital Audio Out
CD Playback
Video Output
DTS Downmix
Language
Display
Options
Speakers
i.LINK Setup
If you've selected DTS > PCM in DTS Out on
page 61, or 2 Channel in Audio Output Mode
below, you can choose the way the DTS signal
is downmixed PCM audio. Stereo downmixes
the signal to 2-channel stereo, whereas Lt/Rt
downmixes to a 2-channel signal compatible
with Dolby surround matrix decoders. (This
allows you to hear surround sound if your AV
receiver or amplifier has Dolby Pro Logic
capability.)
Speakers
PCM Playback
DTS CD Playback

Audio Output Mode

• Set in Setup Navigator (Default: 2
If you connected this player to an AV receiver
using the 5.1 channel analog outputs, set this
to 5.1 Channel. This will enable you to enjoy
multichannel sound.
If you connected only the stereo analog
outputs, set to 2 Channel. On this setting
multichannel audio is downmixed to 2
channels for stereo analog output.
Stereo
• When set to 5.1 Channel, you'll only get
Lt/Rt
• When set to 5.1 Channel the AUDIO
Channel)
Initial Settings
Digital Audio Out
Audio Out
Video Output
Speaker Installation
Language
Speaker Distance
Display
Channel Level
Options
Speaker
i.LINK Setup
sound from all speakers when playing
multichannel discs.
OUT (2ch) jacks output the front L/R
channels of multichannel discs.
08
2 Channel
5.1 Channel
73
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-868avi

Table of Contents