Sp Get Mount Subcommand - Sun Microsystems Sun Fire V20z Management Manual

Return Codes for Subcommand sp delete mount
TABLE A-29
Return Code
NWSE_Busy
NWSE_RPCConnected
NWSE_RPCConnRefused
NWSE_NoRouteToHost
NWSE_HostDown
NWSE_UnknownError

SP Get Mount Subcommand

Description: Displays the current mount points on the SP.
Command format:
sp get mounts [{-l | --local} MOUNTPOINT ] [-H | --noheader]
delim <DELIMITER> }]
lists the arguments for this subcommand.
TABLE A-30
Arguments for Subcommand sp get mount
TABLE A-30
Arguments
{-l | --local}
{ -H | --noheader }
{ -D | --delim }
ID Description
Device or resource is busy.
9
RPC client already connected.
11
RPC connection refused.
12
No route to host (network down).
13
Host is down.
14
Miscellaneous error not captured by other errors.
15
Description
Specifies the local mountpoint. If you do not specify -l, /mnt is
implicit as the local mount point.
Suppresses column headings.
Delimits columns with the specified delimiter. Headings are also
delimited unless suppressed. The delimiter can be any character
or string.
[{-D | --
Appendix A Commands 79