Sp Delete Mount; Return Codes - Sun Microsystems Sun Fire V20z Management Manual

TABLE A-27
Return Code
NWSE_RPCConnected
NWSE_RPCConnRefused
NWSE_NoRouteToHost
NWSE_HostDown
NWSE_UnknownError

SP Delete Mount

Description: Deletes a mountpoint.
Command format:
sp delete mount LOCAL MOUNT POINT [-q | --quiet]
TABLE A-28
TABLE A-28
Argument
LOCAL MOUNT POINT
[-q | --quiet]

Return Codes

TABLE A-29
TABLE A-29
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_InvalidArgument
NWSE_NoPermission
NWSE_NoMemory
78 Sun Fire V20z Server—Server Management Guide • March 2004
Return Codes for Subcommand sp add mount
ID
11
12
13
14
15
lists the arguments for this subcommand.
Arguments for Subcommand sp delete mount
Description
Specifies the mount point to remove. If you do not specify the local
mount point, /mnt is implicit as the default value.
If the mount point to delete is not found, this argument specifies that
no error be returned.
lists the return codes for this subcommand.
Return Codes for Subcommand sp delete mount
ID
0
1
4
6
8
Description
RPC client already connected.
RPC connection refused.
No route to host (network down).
Host is down.
Miscellaneous error not captured by other errors.
Description
Command successfully completed.
Invalid usage: bad parameter usage, conflicting
options specified.
One or more arguments were incorrect or invalid.
Not authorized to perform this operation.
Insufficient memory.