Return Codes - Sun Microsystems Sun Fire V20z Management Manual

Arguments for Subcommand platform set console
TABLE A-9
Arguments
{-n | --noprune}
{-p | --prune}
{-s | --serial}
{sp|platform}

Return Codes

lists the return codes for this subcommand.
TABLE A-10
Return Codes for Subcommand platform set console
TABLE A-10
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_InvalidArgument
NWSE_NoPermission
NWSE_NoMemory
NWSE_DeviceError
Description
Indicates that the platform console log should be the raw console
data. Cannot be used with: -p.
Indicates that the platform console log is to be cleaned of ANSI
sequences and pruned of duplicated information. Cannot be used
with: -n.
Specify whether the serial port is connected to the platform COMA
port or to the SP serial console.
Cannot be used with: -e [platform] -d [platform] -p [platform]
-n [platform] -S [platform] -l [platform].
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
Request was issued, but was not serviced by the
2
server. RPC procedure timed out and the request
may or may not have been serviced by the server.
Unable to connect to the RPC server.
3
One or more arguments were incorrect or invalid.
4
Not authorized to perform this operation.
6
Insufficient memory.
8
Unable to read or write to the device.
25
Appendix A Commands 65