Sp Add Mount Subcommand; Return Codes - Sun Microsystems Sun Fire V20z Management Manual

SP Add Mount Subcommand

Description: Creates or resets a mountpoint.
Command format:
sp add mount [{-l | --local} MOUNTPOINT ]
{-r | --remote} SERVER:FILESYSTEM
[{-u|--user} USER] [{-p|--password} PASSWORD ]
lists the arguments for this subcommand.
TABLE A-26
Arguments for Subcommand sp add mount
TABLE A-26
Argument Description
Optional; Specifies the local mount point. The only mount point
{-l | --local}
supported is /mnt.
Specifies the remote server and file system. If SERVER specifies a
{-r | --remote}
host name, DNS must be properly configured.
Specifies the user name for the mount. Only required for SMB.
{-u | --user}
Specifies the password for the mount user. Only required for SMB.
{-p | --password}
Note – Several error messages may appear when executing an smb mount while
mounting windows partitions. Check that the mount succeeded after the call by
running the subcommand sp get mount.

Return Codes

lists the return codes for this subcommand.
TABLE A-27
Return Codes for Subcommand sp add mount
TABLE A-27
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_InvalidArgument
NWSE_NoPermission
NWSE_NoMemory
NWSE_Busy
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
One or more arguments were incorrect or invalid.
4
Not authorized to perform this operation.
6
Insufficient memory.
8
Device or resource is busy.
9
Appendix A Commands 77