Mitsubishi Electric MELSEC iQ-F FX6U Hardware User Manual page 199

Item
Connection type FX5-EYT/ESS,
FX5-16ET/ESS,
FX5-32ET/SS,
FX5-16ET/ESS-H
FX5-CEYT/DSS,
FX5-C32ET/DSS
FX5-C32EYT/DSS-TS,
FX5-C32ET/DSS-TS
Output type
External power supply
Output circuit insulation
Indication of output operation
Max. load FX5-EYT/ESS,
FX5-16ET/ESS,
FX5-32ET/SS,
FX5-16ET/ESS-H
FX5-CEYT/DSS(-TS),
FX5-C32ET/DSS(-TS)
Open circuit leakage current
Min. load
Response time OFF→ON FX5-EYT/ESS,
FX5-16ET/ESS,
FX5-32ET/SS
FX5-CEYT/DSS(-TS),
FX5-C32ET/DSS(-TS)
FX5-16ET/ESS-H
ON→OFF FX5-EYT/ESS,
FX5-16ET/ESS,
FX5-32ET/SS
FX5-CEYT/DSS(-TS),
FX5-C32ET/DSS(-TS)
FX5-16ET/ESS-H
Maximum frequency FX5-16ET/ESS-H
Voltage drop when ON
Output circuit configuration FX5-EYT/ESS,
FX5-16ET/ESS,
FX5-32ET/SS,
FX5-16ET/ESS-H
FX5-CEYT/DSS(-TS),
FX5-C32ET/DSS(-TS)
Specifications
Screw terminal block (M3 screws)
Connector
Spring clamp terminal block
Transistor/source output
5 to 30 V DC
Photo-coupler insulation
LED is lit when output is on
• With FX5-C32EYT/DSS, the lower number/higher number order is switched with the DISP switch
F/L.
• With FX5-C32ET/DSS, the input/output is switched with the DISP switch IN/OUT.
0.5 A/point
The total load current of resistance loads per common terminal should be the following value.
• 4 output points/common terminal: 0.8 A or less
• 8 output points/common terminal: 1.6 A or less
0.1 A/point
The total load current of resistance loads per common terminal should be the following value.
• 8 output points/common terminal: 0.8 A or less
0.1 mA/30 V DC

0.2 ms or less/200 mA (at 24 V DC)
0.2 ms or less/100 mA (at 24 V DC)
Y0, Y1, Y4, Y5: 2.5 μs or less/10 mA (at 5 to 24 V DC)
Y2, Y3, Y6, Y7: 0.2 ms or less/200 mA (at 24 V DC)
0.2 ms or less/200 mA (at 24 V DC)
0.2 ms or less/100 mA (at 24 V DC)
Y0, Y1, Y4, Y5: 2.5 μs or less/10 mA (at 5 to 24 V DC)
Y2, Y3, Y6, Y7: 0.2 ms or less/200 mA (at 24 V DC)
Y0, Y1, Y4, Y5: 200 kpps
1.5 V or less (Y0, Y1, Y4, and Y5 of FX5-16ET/ESS-H is 1.0 V or less)
Load
Y
DC power
supply
+V0
Fuse
Y
DC power
supply
+V1
Fuse
Load
Y
DC power supply
+V0
Fuse
+V0
Y
DC power supply
+V1
Fuse
+V1
APPX
197
Appendix 5 I/O Module
A