Mitsubishi Electric MELSEC iQ-F FX6U Hardware User Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. Controller
  5. MELSEC iQ-F FX6U
  6. Hardware user manual
Mitsubishi Electric MELSEC iQ-F FX6U Hardware User Manual

Mitsubishi Electric MELSEC iQ-F FX6U Hardware User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MELSEC iQ-F
FX5U User's Manual (Hardware)

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric MELSEC iQ-F FX6U

Summary of Contents for Mitsubishi Electric MELSEC iQ-F FX6U

  • Page 1 MELSEC iQ-F FX5U User's Manual (Hardware)

  • Page 3: Safety Precautions

    SAFETY PRECAUTIONS (Read these precautions before use.) Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety in order to handle the product correctly. This manual classifies the safety precautions into two categories: [ WARNING] and [ CAUTION].
  • Page 4 WARNING [Precautions for using products in a UL/cUL Class , Division 2 environment] ● Products with the Cl., DIV.2 mark on the rating plate are suitable for use in Class , Division 2, Groups A, B, C and D hazardous locations, or nonhazardous locations only. This mark indicates that the product is certified for use in the Class , Division 2 environment where flammable gases, vapors, or liquids exist under abnormal conditions.
  • Page 5 [INSTALLATION PRECAUTIONS] WARNING ● Make sure to cut off all phases of the power supply externally before attempting installation or wiring work. Failure to do so may cause electric shock or damage to the product. ● Use the product within the generic environment specifications described in Page 30 Generic Specifications of this manual.
  • Page 6 [WIRING PRECAUTIONS] WARNING ● Make sure to cut off all phases of the power supply externally before attempting installation or wiring work. Failure to do so may cause electric shock or damage to the product. ● Make sure to attach the terminal cover, provided as an accessory, before turning on the power or initiating operation after installation or wiring work.
  • Page 7 CAUTION ● Install module so that excessive force will not be applied to terminal blocks, power connectors, I/O connectors, communication connectors, or communication cables. Failure to do so may result in wire damage/breakage or PLC failure. ● Make sure to observe the following precautions in order to prevent any damage to the machinery or accidents due to malfunction of the PLC caused by abnormal data written to the PLC due to the effects of noise.
  • Page 8 ● Do not disassemble or modify the PLC. Doing so may cause fire, equipment failures, or malfunctions. For repair, contact your local Mitsubishi Electric representative. ● After the first use of the SD memory card, do not insert/remove the memory card more than 500 times.
  • Page 9 [TRANSPORTATION PRECAUTIONS] CAUTION ● When transporting the PLC with the optional battery, turn on the PLC before shipment, confirm that the battery mode is set using a parameter and the BAT LED is OFF, and check the battery life. If the PLC is transported with the BAT LED ON or the battery exhausted, the battery-backed data may be unstable during transportation.

  • Page 10: Précautions De Sécurité

    PRÉCAUTIONS DE SÉCURITÉ (Lire ces précautions avant toute utilisation du produit.) Avant d'utiliser ce produit, lire attentivement ce manuel ainsi que les manuels auxquels il renvoie, et toujours considérer la sécurité comme de la plus haute importance en manipulant le produit correctement. Dans ce manuel les précautions de sécurité...
  • Page 11 AVERTISSEMENT ● Construire un circuit de verrouillage dans le programme afin que l'ensemble du système fonctionne toujours sur le côté sûr avant d'exécuter le contrôle (pour le changement de données) du contrôleur programmable en fonctionnement. Lisez attentivement le manuel et assurez-vous une sécurité complète avant d'exécuter d'autres commandes (pour le changement de programme, le changement de paramètre, la sortie forcée et le changement d'état d’opération) du contrôleur programmable en cours de fonctionnement.
  • Page 12 [PRÉCAUTIONS DE CONCEPTION] ATTENTION ● À la commande d'une charge inductive comme une lampe, un réchauffeur ou une électrovanne, un fort courant (environ 10 fois supérieur à l'intensité normale) peut traverser la sortie quand celle-ci passe de OFF à ON. Prenez les mesures appropriées pour que l’intensité de courant ne dépasse pas la valeur correspondant à...
  • Page 13 [PRÉCAUTIONS D'INSTALLATION] ATTENTION ● Ne pas toucher directement les parties conductrices du produit. Cela pourrait être à l'origine d'une panne ou d'un dysfonctionnement. ● Lors du perçage des trous de vis ou du câblage, assurez-vous que les débris de coupe et de câblage ne pénètrent pas dans les fentes de ventilation du contrôleur programmable.
  • Page 14 [PRÉCAUTIONS DE CABLAGE] AVERTISSEMENT ● Assurez-vous de couper toutes les phases de l'alimentation externe avant d’essayer l'installation ou le câblage. Faute de quoi, il y a risque d'électrocution ou d'endommagement du produit. ● Assurez-vous d'attacher le couvercle de borne, fourni en tant qu'accessoire, avant d'alimentation ou d'opération de lancement après installation ou câblage.
  • Page 15 [PRÉCAUTIONS DE CABLAGE] ATTENTION ● Ne pas fournir d'alimentation aux bornes [24 +] et [24 V] (alimentation de service à 24 V DC) sur le module CPU ou les modules d'extension. Cela pourrait endommager le produit. ● Effectuer la mise à la terre classe D (résistance à la mise à la terre : 100 Ω ou moins) de la borne de mise à...
  • Page 16 ● Ne pas démonter ni modifier le contrôleur programmable. Cela pourrait causer un départ de feu, une panne ou un dysfonctionnement des équipements. Pour réparation, contactez votre représentant local de Mitsubishi Electric. ● Après la mise en service de la carte-mémoire SD, ne pas insérer/retirer la carte-mémoire plus de 500 fois.
  • Page 17 [PRECAUTIONS D’OPÉRATION] ATTENTION ● Construire un circuit de verrouillage dans le programme afin que l'ensemble du système fonctionne toujours sur le côté sûr avant d'exécuter le contrôle (pour le changement de données) du contrôleur programmable en fonctionnement. Lisez attentivement le manuel et assurez-vous une sécurité complète avant d'exécuter d'autres commandes (pour le changement de programme, le changement de paramètre, la sortie forcée et le changement d'état d’opération) du contrôleur programmable en cours de fonctionnement.

  • Page 18: Introduction

    • Since the examples indicated by this manual, technical bulletin, catalog, etc. are used as a reference, please use it after confirming the function and safety of the equipment and system. Mitsubishi Electric will accept no responsibility for actual use of the product based on these illustrative examples.
  • Page 19 MEMO...

  • Page 20: Table Of Contents

    CONTENTS SAFETY PRECAUTIONS ..............1 PRÉCAUTIONS DE SÉCURITÉ...
  • Page 21 SD Memory Card ............... . 58 Battery .
  • Page 22 Connecting method F - connection of an extension module (extension connector type) ....102 Connection method G - connection of an FX3 extension module to the bus conversion module ... 102 Connection of power cables .
  • Page 23 CHAPTER 8 MAINTENANCE AND INSPECTION Daily Inspection ............... . 167 Periodic Inspection .
  • Page 24 Appendix 8 Terminal Module..............212 Product configuration.

  • Page 26: Relevant Manuals

    RELEVANT MANUALS Manual name <manual number> Description MELSEC iQ-F FX5U CPU Module Hardware Manual Describes the details of input/output specifications, wiring and installation of the <JY997D53401> FX5U CPU module from MELSEC iQ-F FX5U User's Manual (Hardware). MELSEC iQ-F FX5 User's Manual (Startup) Performance specifications, procedures before operation, and troubleshooting of the <JY997D58201>...

  • Page 27: Terms

    TERMS Unless otherwise specified, this manual uses the following terms. •  indicates a variable part to collectively call multiple models or versions. (Example) FX5U-32MR/ES, FX5U-32MT/ES  FX5U-32M/ES • For details on the FX3 devices that can be connected with the FX5U CPU module, refer to Page 47 PRODUCT LIST. Terms Description ■Devices...
  • Page 28 Abbreviation of Secure Digital Memory Card. Device that stores data using flash memory. Peripheral device Generic term for engineering tools and GOTs Generic term for Mitsubishi Electric Graphic Operation Terminal GOT1000 and GOT2000 series ■Software packages Engineering tool The product name of the software package for the MELSEC programmable controllers...

  • Page 29: Chapter 1 Outline

    OUTLINE Part Names Front panel [10] [11] Name Description DIN rail mounting hooks Hook for mounting the CPU module on a DIN rail of DIN46277 (35 mm wide). Expansion adapter connecting When connecting an expansion adapter, secure it with these hooks. hooks Terminal block cover Cover for protecting the terminal block.
  • Page 30 With cover open [10] Name Description Built-in RS-485 communication Terminal block for connection with RS-485-compatible devices terminal block RS-485 terminal resistor selector Switch for switching terminal resistance for built-in RS-485 communication. switch RUN/STOP/RESET switch Switch for operating the CPU module. (Page 166 Methods of running, stopping, and resetting) RUN: Runs the program STOP: Stops the program RESET: Resets the CPU module (hold the switch on the RESET side for approximately 1 second.)

  • Page 31: Side

    Side Left side/right side Left side Right side Name Description Expansion adapter connector cover Cover for protecting the expansion adapter connector. Connect the expansion adapter to the expansion adapter connector under the cover. Genuine product certification label Genuine product certification label to prevent counterfeiting Nameplate The product model name, Manufacturer's serial number, power supply specifications, and MAC address are shown.

  • Page 32: Chapter 2 Specifications

    SPECIFICATIONS The CPU module specifications are explained below. Generic Specifications Item Specifications *2*3 Operating ambient temperature -20 to 55, non-freezing Storage ambient temperature -25 to 75, non-freezing Operating ambient humidity 5 to 95%RH, non-condensation Storage ambient humidity 5 to 95%RH, non-condensation *5*6 Vibration resistance ...
  • Page 33 Dielectric withstand voltage test and insulation resistance test Perform dielectric withstand voltage test and insulation resistance test at the following voltages between each terminal and the CPU module ground terminal. ■ CPU module, I/O module Between terminals Dielectric Insulation resistance Remarks withstand voltage ...

  • Page 34: Power Supply Specifications

    Power Supply Specifications The CPU module power supply specifications are explained below. For the consumption current of extension modules, refer to Page 47 PRODUCT LIST or manuals of each extension module. AC power supply type Item Specifications Rated voltage 100 to 240 V AC Allowable supply voltage range 85 to 264 V AC Frequency rating...

  • Page 35: Dc Power Supply Type

    DC power supply type Item Specifications Rated voltage 24 V DC Allowable supply voltage range 16.8 to 28.8 V DC Allowable instantaneous power failure time Operation can be continued upon occurrence of instantaneous power failure for 5 ms or less. Power fuse FX5U-32M/D...

  • Page 36: Input Specifications

    Input Specifications The CPU module input specifications are explained below. 24 V DC input (sink/source) The input points in the table below indicate the CPU module terminal points. Item Specifications No. of input points FX5U-32M 16 points FX5U-64M 32 points FX5U-80M...
  • Page 37 Item Specifications Input circuit AC power supply type • When using 24 V DC service power supply configuration Sink input wiring Source input wiring Fuse Fuse 100 to 240 V AC 100 to 240 V AC Input impedance Input impedance •...

  • Page 38: Output Specifications

    Output Specifications The CPU module output specifications are explained below. Relay output Item Output Specifications No. of output points FX5U-32MR/ 16 points FX5U-64MR/ 32 points FX5U-80MR/ 40 points Connection type Removable terminal block (M3 screws) Output type Relay External power supply 30 V DC or less 240 V AC or less ("250 V AC or less"...

  • Page 39: Transistor Output

    Transistor output Item Output specifications No. of output points FX5U-32MT/ 16 points FX5U-64MT/ 32 points FX5U-80MT/ 40 points Connection type Removable terminal block (M3 screws) Output type FX5U-MT/S Transistor/sink output FX5U-MT/SS Transistor/source output External power supply 5 to 30 V DC Max.

  • Page 40: Performance Specifications

    Performance Specifications Item Specification Control system Stored-program repetitive operation Input/output control system Refresh system (Direct access input/output allowed by specification of direct access input/output [DX, DY]) Programming Programming language Ladder diagram (LD), structured text (ST), function block diagram/ladder diagram (FBD/LD) specifications Programming extension function Function block (FB), function (FUN), label programming (local/global)
  • Page 41 Number of device points Item Base Max. number of points No. of user device Input relay (X) 1024 points The total number of X and Y assigned to input/output points is up to points 256 points. Output relay (Y) 1024 points Internal relay (M) 32768 points (can be changed with parameter) Latch relay (L)

  • Page 42: Built-In Analog Specifications

    Built-in Analog Specifications The analog input/output specifications of the built-in analog function are explained below. For details on the analog built-in function, refer to MELSEC iQ-F FX5 User's Manual (Analog Control - CPU module built- in, Expansion adapter). Analog input Item Specifications Analog input points...

  • Page 43: Communication Specifications

    Communication Specifications The built-in Ethernet and built-in RS-485 communication specifications are as explained below. Built-in Ethernet communication For details of built-in Ethernet communication, refer to the following. MELSEC iQ-F FX5 User's Manual (Ethernet Communication) MELSEC iQ-F FX5 User's Manual (SLMP) CC-Link IE field network Basic Reference Manual Item Specifications...

  • Page 44: Built-In Rs-485 Communication

    Built-in RS-485 communication For details of built-in RS-485 communication, refer to the following. MELSEC iQ-F FX5 User's Manual (Serial Communication) MELSEC iQ-F FX5 User's Manual (MELSEC Communication Protocol) MELSEC iQ-F FX5 User's Manual (MODBUS Communication) Item Specifications Transmission standards Conforms to RS-485/RS-422 specifications Data transmission speed Max.

  • Page 45: External Dimensions

    External Dimensions CPU module FX5U-32M 2-4.5 mounting holes Unit: mm Model W1 (mounting hole pitch) Mass (weight) FX5U-32M 150 mm 123 mm Approx. 0.7 kg • Exterior color Main body: Munsell 0.6B7.6/0.2 • Accessories Dust proof protection sheet Manual supplied with product FX5U-64M, FX5U-80M...

  • Page 46: Terminal Layout

    2.10 Terminal Layout Built-in RS-485 terminal European type terminal block 5 poles Built-in analog terminal European type terminal block 5 poles Analog Analog input output Built-in Ethernet connector Signal name TXD+ TXD- RXD+ Not used Not used RXD- Not used Not used 2 SPECIFICATIONS 2.10 Terminal Layout...
  • Page 47 Power, input/output terminal block ■Interpretation of terminal block layout Power supply 24 V DC service [•] Vacant terminal (Do not use) Input terminal terminals power supply S/S 0 V 24 V Output terminals FX5U-32MR/ES connected to COM3 COM0 3 COM1 COM2 COM3 Common terminal...
  • Page 48 ■FX5U-64M • AC power supply type S/S 0V 16 X20 FX5U-64MR/ES, FX5U-64MT/ES COM5 COM0 COM1 COM2 COM3 COM4 FX5U-64MT/ESS • DC power supply type 16 X20 FX5U-64MR/DS, FX5U-64MT/DS COM5 COM0 COM1 COM2 COM3 COM4 FX5U-64MT/DSS ■FX5U-80M • AC power supply type S/S 0V X40 42 FX5U-80MR/ES, FX5U-80MT/ES...

  • Page 49: Chapter 3 Product List

    PRODUCT LIST The following shows the system configuration equipment of the FX5U. Overall Configuration Expansion boards Battery Connector • FX5-232-BD FX3U-32BL Cable • FX5-485-BD • FX5-422-BD-GOT Expansion CPU module I/O module FX5 Intelligent function module adapters Input/output Input Output Analog Network Analog •...

  • Page 50: Cpu Module

    CPU Module The CPU module incorporates a CPU, memory, input/output terminals, and power supply. FX5U Power supply, Input/output type: Input/output connection on screw terminal block. • R/ES: AC power supply/24 V DC (sink/source) input/Relay output • T/ES: AC power supply/24 V DC (sink/source) input/Transistor (sink) output Total number of CPU module •...

  • Page 51: Extension Module

    The model name of the CPU module can be checked on the nameplate on the right side. However, when extension modules are connected, the nameplate cannot be seen. Check the model name in the following places. Model name (abbreviation) Extension Module Extension modules are used to expand inputs/outputs, functions, and others.

  • Page 52: I/O Module

    I/O module The I/O module is used to expand inputs/outputs. For details, refer to Page 187 I/O Module. Input/output type: The module having "TS" in the model name is the spring clamp terminal block type. Input module • X/ES: 24 V DC (sink/source) input •...
  • Page 53 Output module The output module is used to expand outputs. ■Extension cable type Model No. of input/output points Input type Output Input/ Current consumption type output Total No. No. of No. of 5 V DC power 24 V DC power connection of points input...
  • Page 54 ■Extension connector type Model No. of input/output points Input type Output Input/ Current consumption type output Total No. No. of No. of 5 V DC 24 V DC External 24 V DC connection of points input output power power power supply type points points...

  • Page 55: Intelligent Function Module

    Intelligent function module Intelligent function modules are modules that have functions other than input/output, such as simple motion modules. For details, refer to manuals of each module. FX5 intelligent function module ■Analog Model Function No. of occupied Current consumption input/output 5 V DC power 24 V DC External 24 V DC...
  • Page 56 FX3 intelligent function module The following FX3 intelligent functions modules can be used in FX5U systems by using bus conversion modules. For the bus conversion modules to be connected, refer to Page 56 Bus conversion module. To use the modules, refer to Page 61 Bus conversion module. ■Analog Model Function...

  • Page 57: Extension Power Supply Module

    Extension power supply module The extension power supply module is an added power supply if the built-in power supply of the CPU module is insufficient. For details on the specifications of the extension power supply module, refer to Manuals of each product. FX5 expansion power supply module ■Extension cable type Model...

  • Page 58: Connector Conversion Module

    Connector conversion module The connector conversion module is to connect extension module (extension connector type) with FX5U systems. Model Function No. of occupied Current consumption input/output points 5 V DC power supply 24 V DC power supply    FX5-CNV-IF Connector conversion from CPU module, extension modules...

  • Page 59: Expansion Board

    Expansion Board The expansion board is to expand functions and is connected to the front face of the CPU module. For details on the specifications of the expansion board, refer to Hardware manuals of each product. Model Function No. of occupied Current consumption input/output points 5 V DC power supply...

  • Page 60: Terminal Module

    Terminal Module For details of the terminal modules, refer to Page 212 Terminal Module. Model Function No. of occupied Current consumption input/output 5 V DC power 24 V DC External 24 V DC points supply power supply power supply  ...

  • Page 61: Chapter 4 System Configuration

    SYSTEM CONFIGURATION Configuration of a whole system The configuration of an entire system is shown below as an example. For assignment of the module numbers for extension modules, refer to Page 88 Module number of extension modules. Configuration of whole system Expansion board and expansion adapters FX5 extension module Expansion board...

  • Page 62: Rules Of System Configuration

    Rules of System Configuration The system configuration must meet the following four requirements. Number of connected extension device The number of extension devices that can be connected to a single system of FX5U CPU module is limited. For details, refer to Page 62 Limitations on the Number of Connected Extension Devices. Up to 16 modules CPU module Expansion...
  • Page 63 Current consumption Power of extension devices is supplied from the CPU module, powered input/output module or extension power supply module. The number of extension devices that can be connected must be determined from the capacity of the power supply. For details on the current consumption, refer to Page 69 Limitation on Current Consumption. Input Powered Input...

  • Page 64: Limitations On The Number Of Connected Extension Devices

    Limitations on the Number of Connected Extension Devices Number of connected expansion boards Only 1 expansion board can be connected on the front face of the CPU module. Expansion board Number of connected expansion adapters There is a limitation on the number of expansion adapter connected to the CPU module as follows. Type Limitations Communication adapter...

  • Page 65: Number Of Connected Extension Modules (Including Extended Extension Cable)

    Number of connected extension modules (including extended extension cable) Overall system limitation There is a limitation on the number of connected extension modules in a whole system as follows. Type Limitations Extension module Up to 16 modules can be connected to a system. (Extension power supply modules and connector conversion module are excluded.) Extension power supply module Up to 2 modules can be connected to a system.
  • Page 66 Connection to the powered input/output module There is a limitation on the number of extension modules connected to the powered input/output module as follows. The number of connected modules from the right side of the powered input/output module the next extension power supply module added later must be as follows.

  • Page 67: Limitation On The Number Of Input/Output Points

    Connection to the bus conversion module (connection with FX3 extension devices) There is a limitation on the number of extension modules connected to the bus conversion module as follows. The number of modules connected on the right side of the bus conversion module must be as follows. ■When using FX3 extension power supply modules Type Limitations...

  • Page 68: Total Number Of I/O Points And Remote I/O Points

    Total number of I/O points and remote I/O points With the FX5U CPU module, a total of 512 points or less including the number of input/output points of extension devices and number of remote I/O points can be controlled. The total number of I/O points and remote I/O points must not exceed 512 points. Number of input/output Number of input/output points Number of remote I/O points...

  • Page 69: Calculation Of Number Of Remote I/O Points

    Calculation of number of remote I/O points If the master module of the network is used, calculate the number of remote I/O points connected on the network. The total number of remote I/O points must not exceed 384 points. Remote I/O points that The total number of remote Maximum number of are used in CC-Link IE...
  • Page 70 CC-Link remote I/O The number of remote I/O points to be used in CC-Link are calculated as "number of remote I/O stations × 32 points". Even if using less than 32 remote I/O points, calculate as "number of remote I/O stations × 32 points." Maximum number of Actually used CC-Link remote I/O points CC-Link remote I/O points...

  • Page 71: Limitation On Current Consumption

    Limitation on Current Consumption Power required for expansion adapters, expansion boards, and extension modules is supplied from the CPU module, powered input/output module or extension power supply module. The number of extension devices that can be connected must be determined from the capacity of the power supply. Power supply check from the CPU module (current consumption calculation) Check if power can be supplied to extension devices with the power supply capacity of the CPU module.
  • Page 72 Check if expansion to the CPU module is permitted. • 5 V DC power supply Capacity of 5 V DC Current consumption Calculation result power supply Total of current CPU module consumed by extension module 0 mA mA ≥ 900 mA 510 mA 390 mA •...
  • Page 73 In the case of DC power supply type Calculate following the procedure below. Check the power supply capacity of the CPU module used. (Page 48 CPU Module) Type Model Power supply capacity 5 V DC power supply 24 V DC power supply CPU module FX5U-32MT/DS 900 mA...

  • Page 74: Power Supply Check From The Powered Input/Output Module (Current Consumption Calculation)

    Power supply check from the powered input/output module (current consumption calculation) If 5 V DC and 24 V DC power supplies of the CPU module are insufficient and system cannot be extended, add a powered input/output module. Check if power can be supplied to extension modules with the power supply capacity of the powered input/output module. Powered CPU module Input...
  • Page 75 Check if expansion to the extension power supply module is permitted. • 5 V DC power supply Capacity of 5 V DC Current consumption Calculation result power supply Total of current Powered input/output consumed by extension module module 0 mA mA ≥...
  • Page 76 Check if expansion to the extension power supply module is permitted. • 5 V DC power supply Capacity of 5 V DC Current consumption Calculation result power supply Total of current Powered input/output consumed by extension module module 0 mA mA ≥...

  • Page 77: Power Supply Check From Extension Power Supply Module (Current Consumption Calculation)

    Power supply check from extension power supply module (current consumption calculation) If 5 V DC power supply of the CPU module is insufficient and cannot be extended, add an extension power supply module. Check if power can be supplied to extension modules with the power supply capacity of the extension power supply module. In the case of AC power supply type CPU module extension...
  • Page 78 When connecting an input module after (on the right side of) the extension power supply module When using 24 V DC service power supply of the CPU module or powered input/output module for input circuit of an input module, include the input module in the 24 V DC current consumption calculation. 5 V DC power supply of the input module is supplied from the extension power supply module.
  • Page 79 In the case of DC power supply type CPU module Connector extension Output Expansion Input Output Expansion conversion power Intelligent conversion adapters module module module board supply module module module module Power supply from FX5 extension power supply module (Only the 5 V DC power supply for the input module is supplied by the extension power supply module.) Calculate following the procedure below.
  • Page 80 Check if expansion to the extension power supply module is permitted. • 5 V DC power supply Capacity of 5 V DC Current consumption Calculation result power supply Extension power Total of current supply module consumed by extension module 0 mA mA ≥...

  • Page 81: Rules Of System Configuration And Examples Of Reconfiguration

    Rules of System Configuration and Examples of Reconfiguration The rules of system configuration are explained below referring to a sample system configuration using an expansion board, expansion adapter, I/O module, and intelligent function module. System configuration example The following system configuration is under consideration. FX5U-32MR/ES CC-Link To CC-Link...
  • Page 82 • Number of modules connected to the bus conversion module (Page 65 Connection to the bus conversion module (connection with FX3 extension devices)) Type No. of modules used Limitations Judgment Total No. of intelligent function modules Up to 6 (When not using extension power supply modules) Check on limitations when using extension devices Check on limitations when using the extension devices.
  • Page 83 Check of limitation on the number of input/output points Check if the number of input/output points of the sample system configuration is within the limit range. ■Number of input/output points (Page 66 Calculation of number of input/output points) Type Model No.
  • Page 84 Check of limitation on current consumption Check if power required for extension devices can be supplied from the CPU module and extension power supply module. A case using 24 V DC service power supply for input circuit is explained as an example. ■...

  • Page 85: System Reconfiguration Example

    System reconfiguration example If current consumption of the 5 V DC or 24 V DC power supply is insufficient with the CPU module only, powered input/output module or use an extension power supply module. Reconfigure the example system configuration using an extension power supply module. FX5U-32MR/ES To CC-Link CC-Link...
  • Page 86 • Number of modules connected to the bus conversion module (Page 65 Connection to the bus conversion module (connection with FX3 extension devices)) Type No. of modules used Limitations Judgment Total No. of intelligent function modules Up to 6 (When not using extension power supply modules) Check on limitations when using extension devices Check on limitations when using the extension devices.
  • Page 87 ■Number of remote I/O points (Page 67 Calculation of number of remote I/O points) Network No. of remote I/O points AnyWireASLINK 64 points Maximum number of Remote I/O points Remote I/O points ≤ 384 points 64 points ■Total number of I/O points and remote I/O points (Page 65 Limitation on the Number of Input/Output Points) Max.
  • Page 88 Check of limitation on current consumption Check if power required for extension devices can be supplied from the CPU module and extension power supply module. A case using 24 V DC service power supply for input circuit is explained as an example. ■...
  • Page 89 ■ Check of power supply from the extension power supply module (Page 75 Power supply check from extension power supply module (current consumption calculation)) Power supply capacity of the extension power supply module Type Model Power supply capacity 5 V DC power supply 24 V DC power supply FX5 extension power supply module FX5-1PSU-5V...

  • Page 90: Numbers And Assignment In System

    Numbers and Assignment in System Input/output numbers and module numbers in an FX5U CPU module system are explained. Module input/output number The input/output numbers are octal numbers. Input is assigned to "X" and output to "Y." Input/output numbers are used for communication of ON/OFF data between I/O modules and the CPU module. •...

  • Page 91: Chapter 5 Installation

    INSTALLATION Installation Location Use the PLC under the environmental conditions complying with the generic specifications (Page 30 Generic Specifications). Installation location in enclosure To prevent temperature rise, do not mount the PLC on the floor or ceiling, or in the vertical direction. Always mount the PLC horizontally on the wall as shown in the following figure.

  • Page 92: Layout In Enclosure

    Configuration in 2 stages with extended extension cable FX5U CPU module Extended extension cable • FX5-30EC Powered • FX5-65EC input/output module Another equipment 50mm Layout in enclosure The PLC components can be laid out in one stage or in two stages, upper and lower. The connecting procedures in each case are explained below.

  • Page 93: Examination For Installation Method In Enclosure

    Examination for Installation Method in Enclosure Examine the installation location of PLC considering the environmental conditions (Page 30 Generic Specifications). The PLC can be installed by the following methods. Keep a space of about 2 mm between the products. Installing on DIN rail •...

  • Page 94: Procedures For Installing On And Detaching From Din Rail

    Example of combination of installation on DIN rail and direct installation • The CPU module side can be installed on the DIN rail, and the extension modules extended by the extended extension cable can be directly installed. • The PLC can be installed on a 35 mm wide DIN46277 rail. •...

  • Page 95: Installation Of Cpu Module

    Installation of CPU module Connect the expansion adapter to the CPU module before mounting the PLC in the enclosure. For the connection method of the expansion adapter, refer to Page 100 Connection method B - connection of an expansion adapter. Push out all DIN rail mounting hooks (A in the following figure).

  • Page 96: Installation Of Terminal Modules

    Installation of terminal modules Turn off all the power supplies connected to the CPU module, extension modules, or terminal modules. Fit the upper edge of the DIN rail mounting groove (A in the right figure) onto the DIN rail. Push the product against the DIN rail. Removal of CPU module Open the terminal block cover, gradually loosen the left and right terminal block mounting screws (A in the right...

  • Page 97: Procedures For Installing Directly (With M4 Screws)

    Procedures for Installing Directly (with M4 Screws) The product can be installed directly in the enclosure (with screws). Position the holes so that there is a gap of about 2 mm between the products. Hole pitches for direct mounting The product mounting hole pitches are shown below. For pitch that varies depending on the product, refer to the table.
  • Page 98 I/O module Dimensions Model name Mounting hole pitch W Unit: mm FX5-8EX/ES Refer to the figure shown to the left. FX5-8EYR/ES FX5-8EYT/ES FX5-8EYT/ESS FX5-16EX/ES FX5-16EYR/ES FX5-16EYT/ES FX5-16EYT/ESS FX5-16ER/ES FX5-16ET/ES FX5-16ET/ESS FX5-16ET/ES-H FX5-16ET/ESS-H FX5-32ER/ES FX5-32ET/ES FX5-32ET/ESS FX5-32ER/DS FX5-32ET/DS FX5-32ET/DSS Extension power supply module Dimensions Model name Mounting hole pitch W...

  • Page 99: Hole Pitches When Extension Module Connected

    Hole pitches when extension module connected Unit: mm 15.1 FX5-232ADP FX5U-32MT/ES FX5-16EX/ES FX5-CNV-BUS FX5-1PSU-5V FX3U-1PG *1 The gap between products is 2 mm. Installation of CPU module Connect the expansion adapter to the CPU module before mounting the PLC in the enclosure. For the connection method of the expansion adapter, refer to Page 100 Connection method B - connection of an expansion adapter.

  • Page 100: Installation Of Extension Module (Extension Cable Type)

    Installation of extension module (extension cable type) Make mounting holes on the mounting surface Rear panel Rear panel according to the external dimensions diagram. Push in the DIN rail mounting hook (A in the right figure) of the extension module (extension cable type). If the DIN rail mounting hook is not pushed in, the screw hole is covered, and the extension module cannot be mounted.

  • Page 101: Connection Methods For Cpu Module And Extension Devices

    Connection Methods for CPU Module and Extension Devices This section explains the connection methods for extension devices. Connection of extension devices The connection method varies depending on the combination of products, i.e., the CPU module, expansion board, expansion adapters, and extension modules. The connection methods are explained with the following configuration example.

  • Page 102: Connection Method B - Connection Of An Expansion Adapter

    Connection method B - connection of an expansion adapter This subsection explains how to connect the expansion adapter to the CPU module. Remove expansion adapter connector cover (A in the right figure). Slide the hook for coupling the expansion adapter of the CPU module (B in the right figure).

  • Page 103: Connection Method D - Connection Between Extension Modules (Extension Cable Type)

    Connection method D - connection between extension modules (extension cable type) The procedure for connecting the extension modules (extension cable type) is explained below. (Powered input/output module are excluded.) Remove the top cover (B in the right figure) of the existing module (left side) (A in the right figure).

  • Page 104: Connecting Method F - Connection Of An Extension Module (Extension Connector Type)

    Connecting method F - connection of an extension module (extension connector type) This subsection explains how to connect the extension module (extension connector type). Slide the hook for coupling the extension module (A in the right figure) of the existing module (left side). Remove the subsequent extension connector cover (B in the right figure).

  • Page 105: Connection Of Power Cables

    Connection of power cables Power cable connection of the I/O modules The power must be supplied to the FX5-CEX/D, and FX5-C32ET/D. To supply the power to FX5-CEX/D and FX5-C32ET/D, use two power connectors (upper and lower) on each module for crossover wiring.

  • Page 106: Removal Of Power Cables

    Removal of power cables Hold part "a" on the connecter of the power cable with your fingers, and remove the cable in the direction of the arrow. Example: FX5-C32EX/D Push here with fingers. Precautions If the power cable is removed by force, the cable may break. Connection of I/O cables I/O connectors ■Cable connection to I/O connectors...
  • Page 107 • Terminal module I/O cable Terminal module ■Preparation of I/O connectors • Suitable connector (commercial item) Use 20-pin (1-key) sockets conforming to MIL-C-83503. Check that the sockets do not interfere with peripheral parts including connector covers in advance. • I/O cables (Mitsubishi option) I/O cables on which connectors are attached are prepared.

  • Page 108: Chapter 6 Wiring

    WIRING Wiring Preparations Wiring procedure Before wiring, make sure that the source power supply is off. Prepare the parts for wiring. Prepare crimp terminals and cables needed for wiring. (Page 107 Cable Connecting Procedure) Wire the power supply terminals. For AC power supply type, connect the cables to the power [L] and [N] terminals. For DC power supply type, connect the cables to the power [+] and [-] terminals.

  • Page 109: Removal And Installation Of Removable Terminal Block

    Removal and installation of removable terminal block Removal Loosen terminal block mounting screws on the left and right sides uniformly and remove the terminal block. Installation Place the terminal block at its predetermined position and tighten the terminal block mounting screws on the left and right sides uniformly.
  • Page 110 Wire end treatment Crimp terminal size differs depending on terminal screw size and wiring methods used. • Use crimp terminals of the following sizes. ■M3 terminal screw • When a single wire is connected to a single terminal 3.2 Terminal screw Crimp terminal 6.2 mm or less 3.2 Terminal...

  • Page 111: European-Type Terminal Block

    European-type terminal block Wire the European-type terminal block in accordance with the following specifications. Suitable wiring No. of wire per terminal Wire size Tightening torque Single wire, Strand wire Ferrule with insulation sleeve Built-in analog I/O terminal block One wire 0.2 to 0.5 mm (AWG24 to 20) 0.2 to 0.5 mm...

  • Page 112: Spring Clamp Terminal Block

    ■Tool For tightening terminals, use a small, commercially-available screwdriver with a straight tip. The recommended shape is shown in the figure on the right. ■Precautions With straight tip When a precision screwdriver with a small grip is used, the specified tightening torque cannot be obtained. Use the following screwdriver or equivalent product (grip diameter: 25 mm) to obtain the tightening torque specified above.
  • Page 113 Removing and installing the terminal block The following shows how to remove and install the terminal block. ■Lever position to lock and release A 3-step stopper is attached to prevent the lever from rotating, facilitating installation and removal of the terminal block. When removing or installing the terminal block, move the lever to the corresponding position.
  • Page 114 Connection and disconnection of the cable Spring clamp terminal block is the push-in type, therefore, wiring without a tool is possible only by inserting the connecting terminal to the terminal block. However, the stranded wire does not comply with the push-in type, and a tool is required for connecting cables.

  • Page 115: Grounding

    Grounding Perform the following. • Perform class D grounding (Grounding resistance: 100 Ω or less). • Ground the PLC independently when possible. • If the PLC cannot be grounded independently, perform the "Shared grounding" shown below. Other Other Other equipment equipment equipment Independent grounding...

  • Page 116: Power Supply Wiring

    Power Supply Wiring Examples of AC power supply wiring Power supply example for sink input [-common] AC power supply (100 to 240 V) FX5-4DA-ADP 5 V 0 V 24 V Breaker FX5U-32MT/ES Power ON Class D grounding (grounding resistance: 100  or less) 5 V 0 V 24 V Emergency stop...
  • Page 117 Power supply example for source input [+common] FX5-4DA-ADP AC power supply (100 to 240 V) 5 V 0 V 24 V Breaker FX5U-32MT/ES Power ON Class D grounding (grounding resistance: 100  or less) 5 V 0 V 24 V Emergency stop 24 V DC service...
  • Page 118 Wiring example for an FX5-1PSU-5V (sink input [-common]) The following example shows wiring for an FX5-1PSU-5V when sink input [-common] is used. FX5-4DA-ADP AC power supply (100 to 240 V) 5 V 0 V 24 V Breaker FX5U-32MT/ES Power ON Class D grounding (grounding resistance: 100 ...
  • Page 119 Wiring example for an FX5-1PSU-5V (source input [+common]) The following example shows wiring for an FX5-1PSU-5V when source input [+common] is used. FX5-4DA-ADP AC power supply (100 to 240 V) 5 V 0 V 24 V Breaker FX5U-32MT/ES Power ON Class D grounding (grounding resistance: 100 ...

  • Page 120: Examples Of Dc Power Supply Wiring

    Examples of DC power supply wiring Example of sink input [-common] power supply wiring FX5-4DA-ADP 24 V DC 5 V 0 V 24 V Circuit Protector FX5U-32MT/DS Power ON Class D grounding (grounding resistance: 100  or less) 5 V 0 V 24 V Emergency stop FX5-8EX/ES...
  • Page 121 Example of source input [+common] power supply wiring FX5-4DA-ADP 24 V DC 5 V 0 V 24 V Circuit Protector FX5U-32MT/DS Power ON Class D grounding (grounding resistance: 100  or less) 5 V 0 V 24 V Emergency stop FX5-8EX/ES 5 V 0 V 24 V FX5-32ET/DS...
  • Page 122 Wiring example for an FX5-C1PS-5V (sink input [-common]) FX5-4DA-ADP 24 V DC 5 V 0 V 24 V Circuit Protector FX5U-32MT/DS Power ON Class D grounding (grounding resistance: 100  or less) 5 V 0 V 24 V Emergency stop FX5-8EX/ES 5 V 0 V 24 V FX5-CNV-IF...
  • Page 123 Wiring example for an FX5-C1PS-5V (source input [+common]) FX5-4DA-ADP 24 V DC 5 V 0 V 24 V Circuit Protector FX5U-32MT/DSS Power ON Class D grounding (grounding resistance: 100  or less) 5 V 0 V 24 V Emergency stop FX5-8EX/ES 5 V 0 V 24 V FX5-CNV-IF...

  • Page 124: Input Wiring

    Input Wiring The input wiring of the CPU module, I/O modules, and terminal modules is explained below. 24 V DC input (Sink and source input type) For input specifications of the CPU module, refer to Page 34 Input Specifications. For input specifications of the I/O modules, refer to Page 193 Input specifications. For input specifications of the terminal modules, refer to Page 213 Input specifications.
  • Page 125 Handling of 24 V DC input ■Input terminal For FX5U CPU module, input module (extension cable type), input/output module (extension cable type), powered input/ output module and high-speed pulse input/output module • Sink input • Source input When a no-voltage contact or NPN open collector transistor output When a no-voltage contact or PNP open collector transistor output is connected between an input (X) terminal and the [0V] terminal is connected between an input (X) terminal and the [24V] terminal...
  • Page 126 ■Input circuit • Function of input circuit The primary and secondary circuits for input are insulated with a photocoupler, and the second circuit is provided with a C-R filter. The C-R filter is designed to prevent malfunctions caused by chattering of the input contact and noise from the input line. Input has a response delay switching from ON to OFF and OFF to ON, shown in the following table.
  • Page 127 Precautions for connecting input devices ■In the case of no-voltage contact Use input devices appropriate for low electric current. If no-voltage contacts for high current (switches) are used, contact failure may occur. ■In the case of input device with built-in series diode The voltage drop of the series diode should be the following value or less.
  • Page 128 If the resistance is less than the above parallel resistance Rp (kΩ), connect a bleeder resistance Rb (kΩ) obtained by the following formula as shown in the following figure. Item Specifications Bleeder resistance Rb (kΩ) FX5U-32M X0 to X5 5 Rp / (14-Rp) or less FX5U-64M, FX5U-80M...
  • Page 129 ■When the input signal cannot be received because the current is insufficient The current rating for the CPU module in X20 or more and the I/O module is 4 mA. In some cases, depending on extension devices used, it may not be possible to receive the input signal, due to the insufficient current.

  • Page 130: Input Wiring Example

    Input wiring example Sink input [AC power supply type] FX5U-32MT/ES Fuse Class D grounding (grounding resistance: 100  or less) Three-wire sensor Input Input terminal impedance 5V 0V 24V FX5-16EX/ES Two-wire proximity sensor 5V 0V 24V Input terminal FX5-16EX/ES 24 V DC Three-wire 5V 0V 24V sensor...
  • Page 131 Source input [AC power supply type] FX5U-32MT/ESS Fuse Class D grounding (grounding resistance: 100  or less) Three-wire sensor Input Input impedance terminal 5V 0V 24V Two-wire FX5-16EX/ES proximity sensor 5V 0V 24V Input terminal FX5-16EX/ES 24 V DC Three-wire sensor 5V 0V 24V Input...
  • Page 132 Sink input [DC power supply type] FX5U-32MT/DS Fuse 24 V DC Class D grounding (grounding resistance: 100  or less) Three-wire sensor Input Input terminal impedance 5V 0V 24V FX5-16EX/ES Two-wire proximity sensor 5V 0V 24V Input terminal FX5-16EX/ES 24 V DC Three- 5V 0V 24V wire...
  • Page 133 Source input [DC power supply type] FX5U-32MT/DSS Fuse 24 V DC Class D grounding (grounding resistance: 100  or less) Three-wire sensor Input Input terminal impedance 5V 0V 24V Two-wire FX5-16EX/ES proximity sensor 5V 0V 24V Input terminal Three-wire FX5-16EX/ES 24 V DC sensor 5V 0V 24V...

  • Page 134: Input Wiring Examples Of Terminal Modules

    Input wiring examples of terminal modules FX-16E-TB, FX-32E-TB Connectable models: FX5-CEX/D, FX5-C32ET/D 0 to 7 (Smaller numbers) 0 to 7 (Larger numbers) Input number of PLC Vacant terminal 3-wire sensor 24 V DC Fuse FX-16E-TB/UL, FX-32E-TB/UL Connectable models: FX5-CEX/DS, FX5-C32ET/DSS •...
  • Page 135 • In the case of source wiring 0 to 7 (Larger numbers) 0 to 7 (Smaller numbers) COM0 Input number of PLC Vacant terminal 3-wire sensor PNP 24 V DC Fuse *1 Replace this number with the one of the connected connector. FX-16EX-A1-TB Connectable models: FX5-CEX/D, FX5-C32ET/D 0 to 3...

  • Page 136: Output Wiring

    Output Wiring The output wiring of the CPU module, I/O modules, and terminal modules is explained below. Relay output For output specifications of the CPU module, refer to Page 36 Output Specifications. For output specifications of the I/O modules, refer to Page 195 Output specifications. For output specifications of the terminal modules, refer to Page 214 Output specifications.
  • Page 137 ■Capacitive load Capacitive loads can generate rush current 20 to 40 times the stationary current. Make sure that the rush current does not exceed the current corresponding to the maximum specified resistance load. Capacitive loads such as capacitors may be present in electronic circuit loads including inverters. ■Resistance load For maximum load specifications of resistance load, refer to the following.
  • Page 138 Wiring precautions ■Protection circuit for load short-circuiting A short-circuit at a load connected to an output terminal could cause burnout at the output element or the PCB. To prevent this, a protection fuse should be inserted at the output. Load Fuse COM0 PLCs...

  • Page 139: Transistor Output

    ■In-phase PLC output contacts (*) should be used in an "in-phase" manner. Transistor output For output specifications of the CPU module, refer to Page 36 Output Specifications. For output specifications of the I/O modules, refer to Page 195 Output specifications. For output specifications of the terminal modules, refer to Page 214 Output specifications.
  • Page 140 For the output module (extension connector type) and input/output module (extension connector type), the transistor output type is an 8-point common output type. • Sink output • Source output The COM (number) terminals that are connected each other inside The +V (number) terminals that are connected each other inside the the PLC are prepared.
  • Page 141 ■Output current Maximum load differs for each module. For specifications of each module, refer to the following. For output specifications of the CPU module, refer to Page 36 Output Specifications. For output specifications of the I/O modules, refer to Page 195 Output specifications. For output specifications of the terminal modules, refer to Page 214 Output specifications.

  • Page 142: Triac Output

    Triac output For output specifications of the terminal modules, refer to Page 214 Output specifications. Handling of triac output ■Output terminal Four triac output points are covered by one common terminal. The common terminal blocks can drive loads of different circuit voltage systems (Example: 100 V AC and 24 V DC).
  • Page 143 Wiring precautions ■Protection circuit for load short-circuiting A short-circuit at a load connected to an output terminal could cause burnout at the output element or the PCB. To prevent this, a protection fuse should be inserted at the output. Load Fuse COM1 Terminal...

  • Page 144: Output Wiring Example

    Output wiring example Relay output AC power supply (100 to 240 V) CPU module Fuse relay output COM0 Breaker Power ON Fuse COM1 Fuse COM3 Emergency stop Output module Fuse COM0 relay output DC power supply Load Fuse COM1 Load Power supply for loads connected to PLC output terminals As for emergency stop operation, see "DESIGN...
  • Page 145 Transistor output ■Sink output type CPU module transistor AC power supply (100 to 240 V) output (sink) Fuse COM0 Breaker Load COM1 Power ON Fuse COM3 Emergency Load stop Output module transistor output (sink) Fuse COM0 DC power supply Load Fuse COM1 Load...
  • Page 146 ■Source output type CPU module transistor AC power supply (100 to 240 V) output (source) Fuse Breaker Load Power ON Fuse Emergency Load stop Output module transistor output (source) Fuse DC power supply Load Fuse Load Power supply for loads connected to PLC output terminals As for emergency stop operation, see "DESIGN PRECAUTIONS"...

  • Page 147: Output Wiring Examples Of Terminal Modules

    Output wiring examples of terminal modules FX-16E-TB, FX-32E-TB Connectable models: FX5-CEYT/D, FX5-C32ET/D 0 to 7 (Smaller numbers) 0 to 7 (Larger numbers) COM0 Output number of PLC Vacant terminal Fuse Fuse Fuse 24 V *1 Replace this number with the one of the connected connector. FX-16E-TB/UL, FX-32E-TB/UL Connectable models: FX5-CEYT/DSS, FX5-C32ET/DSS 0 to 7 (Larger numbers)
  • Page 148 FX-16EYR-TB, FX-16EYR-ES-TB/UL Connectable models FX-16EYR-TB: FX5-CEYT/D, FX5-C32ET/D FX-16EYR-ES-TB/UL: FX5-CEYT/DSS, FX5-C32ET/DSS 0 to 7 Smaller numbers 0 to 7 Larger numbers PLC output 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 Relay power supply COM1 COM2...
  • Page 149 FX-16EYT-ES-TB/UL Connectable models: FX5-CEYT/D, FX5-C32ET/D PLC output 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 Photocoupler power supply COM1 COM2 COM3 COM4 COM1 COM2 COM3 COM4 Fuse Fuse 24 V For external wiring precautions, refer to Page 136 Wiring precautions. FX-16EYT-ESS-TB/UL Connectable models: FX5-CEYT/DSS, FX5-C32ET/DSS PLC output...
  • Page 150 FX-16EYS-TB Connectable models: FX5-CEYT/D, FX5-C32ET/D Surge absorbers are connected to each output. PLC output 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 Photocoupler power supply COM1 COM2 COM3 COM4 COM1 COM2 COM3 COM4 Fuse Load...

  • Page 151: Analog Wiring

    Analog Wiring Wiring to the built-in analog I/O terminals of the CPU module is explained below. For specifications of the built-in analog I/O terminals of the CPU module, refer to Page 40 Built-in Analog Specifications. Analog input wiring CH Shield 82.7 k...

  • Page 152: Examples Of Wiring For Various Uses

    Examples of Wiring for Various Uses Notes about examples of wiring The examples of wiring are given under the following conditions. ■Input/output number The input/output numbers are the actual numbers on the program (They may differ from the numbers shown on the product terminals).

  • Page 153: High-Speed Counter

    High-speed counter Examples of wiring for high-speed counters are shown below. When capturing pulses of a response frequency of 50 to 200 kHz, refer to Page 127 In the case of capturing high-speed pulses. For details on the high-speed counters, refer to MELSEC iQ-F FX5 User's Manual (Application). For the programs, refer to MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks).
  • Page 154 ■Example of wiring (When 24 V DC external power supply is used) • NPN open collector transistor output rotary encoder In the case of sink wiring • When the input terminals of the FX5U-32MT/ES are used • When the input terminals of the FX5-16ET/ES-H are used Rotary encoder Rotary encoder 24 V DC...
  • Page 155 2-phase 2-input The wiring examples in this section use the following settings. When settings other than those in the table are used, use the examples shown in the following figures as references for wiring. CH to be used Pulse input mode External preset input External enable input Operation mode CH2 (CPU module) or CH10 (high-speed pulse...
  • Page 156 ■Example of wiring (When 24 V DC external power supply is used) • NPN open collector transistor output rotary encoder In the case of sink wiring • When the input terminals of the FX5U-32MT/ES are used • When the input terminals of the FX5-16ET/ES-H are used Rotary encoder Rotary encoder 24 V DC...

  • Page 157: Interruption

    Interruption Examples of wiring for when the input interruption function is used are shown below. The same wiring is used for the pulse catch and pulse width measurement functions. When capturing pulses of a response frequency of 50 to 200 kHz, refer to Page 127 In the case of capturing high-speed pulses.
  • Page 158 ■When 24 V DC external power supply is used In the case of sink wiring • Example of wiring of FX5U-32MT/ES • Example of wiring of FX5-16ET/ES-H FX5U-32MT/ES Fuse Fuse Class D grounding Class D grounding 24 V DC 24 V DC 1.5k...

  • Page 159: Digital Switch

    Digital switch When DSW instructions are used Examples of wiring for capturing values from a 4-digit digital switch to the data register D100 are given below. For the instructions, refer to MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks). ■Example of program SM400 D100...
  • Page 160 When BIN instructions are used Examples of wiring for capturing values from a 2-digit digital switch to the data register D102 are given below. For the instructions, refer to MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks). ■Example of program SM400 K2X10 D102 ■Example of wiring...

  • Page 161: Input Matrix

    Input matrix Examples of wiring to take ON/OFF status of 24 switches by using MTR instructions are given below. For the instructions, refer to MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks). Example of program SM400 Example of wiring •...

  • Page 162: Seven Segment With Latch

    Seven segment with latch For the instructions, refer to MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks). When SEGL instructions are used Examples of wiring for displaying the current value of D100 on the 4-digit 7-segment display are given below. ■Example of program SM400 SEGL...
  • Page 163 When BCD instructions are used Examples of wiring for displaying the current value of D100 on the 2-digit 7-segment display are given below. ■Example of program SM400 D100 K2Y10 ■Example of wiring • Sink wiring The example is the wiring for the input/output of the FX5U-32MT/ES. FX5U-32MT/ES Transistor output (sink) COM2...

  • Page 164: Chapter 7 Operation Adjustment

    OPERATION ADJUSTMENT Preparation for Operation Preliminary inspection Incorrect connection of the power supply terminal, contact of the DC input wire and power supply wire, or short-circuiting of output wires may result in serious damage. Before applying power, check that the power supply and ground terminals are connected correctly and input/output devices are wired properly.

  • Page 165: Procedure Until Operation

    Procedure until operation The procedure until operation is explained below. Turn on the power of the system. Check the following items before turning on the power of the system. When the CPU module with the factory default setting is powered on, the ERR LED flashes because the module has no programs. •...

  • Page 166: Connection With A Personal Computer

    Connection with a personal computer Connect the CPU module with a personal computer on which an engineering tool has been installed. The system configuration examples and GX Works3 settings are described below. For details, refer to GX Works3 Operating Manual. Direct connection Setting examples for accessing the CPU module that is directly connected with a personal computer are shown below.

  • Page 167: Operation And Test

    ■Serial connection FX5-232ADP FX5-232-BD COM port COM port (COM1) (COM1) RS-232 cable RS-232 cable (FX-232CAB-1) (FX-232CAB-1) GX Works3 settings Item Selection item Internal setting Input value  PC side I/F Serial/USB RS-232C COM Port COM1 Transmission Speed 115.2Kbps PLC side I/F PLC Module PLC Mode FX5CPU...

  • Page 168: Running, Stopping, And Resetting

    Running, Stopping, and Resetting Methods of running, stopping, and resetting The following two methods of running, stopping, and resetting the FX5U CPU modules are provided. Using the RUN/STOP/RESET switch The operation status of the CPU module can be changed with the RUN/STOP/RESET switch. Setting the RUN/STOP/RESET switch to the RUN position runs the program.

  • Page 169: Chapter 8 Maintenance And Inspection

    MAINTENANCE AND INSPECTION To keep using the PLC in the optimal condition, perform the following inspections daily or periodically. Daily Inspection Perform the following inspections on a daily basis. Item Inspection item Description Installation status Looseness of mounting screws Retighten the mounting screws. of the module Mounting status of the module The module should be securely mounted.

  • Page 170: Battery

    Battery Part names The Latch device memory and clock data upon power interruption. The battery is not incorporated in the CPU module during shipment from the factory. Order it if necessary. Parameter setting is required to back up the device memory and clock data. (Page 169 Setting an optional battery using the engineering tool) External appearance Name...
  • Page 171 Insert the battery connector (B in the figure below) of the battery. Set the battery inside the lower hook (C in the following figure), push up the upper hook (D in the following figure), and then fit the battery in the battery holder (E in the following figure). The following figure shows the position of the battery.

  • Page 172: Battery Replacement

    Battery replacement Battery life and replacement guidelines When the battery voltage is low, the BAT LED on the panel flashes red while the power is on, and SM51 (SM8005) and SM52 (SM8006) turn ON. The memory can be retained for about one month after the LED is turned on. However, the drop in battery voltage may not be detected immediately.

  • Page 173: Special Relay For Low Battery Voltage

    Extract the old battery from the battery holder ("B" in figure below), and disconnect the battery connector ("C" in figure below). Install the new battery. (Page 168 Battery attachment) Attach the expansion board connector cover. If an expansion board was removed in step 2, reinstall it. •...

  • Page 174: Chapter 9 Troubleshooting

    Reconnect the modules and wire one by one to identify the cause. If the PWR LED still does not turn on even after the items shown above are checked, there may be a hardware issue. Consult your local Mitsubishi Electric representative. Checking the BAT LED If the BAT LED is flashing, check the following items.

  • Page 175: Checking The Err Led

    • Fit a noise filter onto the power supply line. If the ERR LED still does not turn off even after the items shown above are checked, there may be a hardware issue. Consult your local Mitsubishi Electric representative. Checking the P.RUN LED If the P.RUN LED is turned off, check the status of the ERR LED and take corrective actions.

  • Page 176: Module Diagnostics (Cpu Diagnostics)

    Module diagnostics (CPU diagnostics) This function diagnoses CPU module, expansion adapter, and expansion board. (The current error and its details can be checked.) Information required for troubleshooting, such as the current error, details and cause of the error, and action to be taken, are displayed.

  • Page 177: Event History

    Event history This function displays the event information, such as errors that occurred in the CPU module, expansion board, expansion adapter and network errors. Since information collected before the CPU module is powered off or reset can also be displayed, the error cause can be identified based on the errors.

  • Page 178: 9.4 Error Status And Operations On Occurrence Of An Error

    Stop The module is unable to continue its operation due to a Perform troubleshooting. If the error still persists, hardware issue. consult your local Mitsubishi Electric representative. Moderate Stop The module is unable to carry out programs or continue the...

  • Page 179: Backing Up The Data

    Backing Up the Data Saving the following information immediately after the occurrence of an error helps in analyzing the cause of the error. • Parameters, programs, and device memory • Error histories Backing up parameters, programs, and device memory The procedure for backing up parameters, programs, and device memory using the engineering tool is explained below. [Online][Read from PLC] Check the parameters, programs, and device memory to back up.

  • Page 180: Troubleshooting For Each Symptom

    The output may be turned off unintentionally in the program. Review user program (Duplicate coils or RST instructions). ■When the output does not turn off There may be a hardware fault. Consult your local Mitsubishi Electric representative. Input does not turn on...

  • Page 181: Plc Write, Plc Read

    The boot operation may be being performed. Read the parameters and review the boot file settings with the engineering tool. If the boot operation is not being performed, there may be a hardware issue. Consult your local Mitsubishi Electric representative.

  • Page 182: Appendix

    APPENDIX Appendix 1 How to Check the Date of Manufacture Check the date of manufacture of the product (except the expansion board) as follows. • Nameplate • Module front surface (CPU module only) Checking the nameplate The date of manufacture of the product can be checked from the manufacturer's serial number "S/N" indicated on the nameplate of the product.

  • Page 183: Appendix 2 Standards

    Compliance to EMC directive and LVD directive of the entire mechanical module should be checked by the user/ manufacturer. For more details please contact to the local Mitsubishi Electric sales site. Requirement for compliance with EMC directive...
  • Page 184 ■Product compatibility Type: Programmable controller (open type equipment) Models: FX5 manufactured from October 1st, 2014 FX5U-32MR/ES FX5U-32MT/ES FX5U-32MT/ESS FX5U-64MR/ES FX5U-64MT/ES FX5U-64MT/ESS FX5U-80MR/ES FX5U-80MT/ES FX5U-80MT/ESS FX5-8EX/ES FX5-8EYR/ES FX5-8EYT/ES FX5-8EYT/ESS FX5-16EX/ES FX5-16EYR/ES FX5-16EYT/ES FX5-16EYT/ESS FX5-32ER/ES FX5-32ET/ES FX5-32ET/ESS FX5-232ADP FX5-485ADP FX5-232-BD FX5-485-BD FX5-422-BD-GOT FX5-1PSU-5V FX5-CNV-BUS from January 1st, 2015...
  • Page 185 Mitsubishi Electric recommends that shielded cables be used. If no other EMC protection is provided, users may experience temporary loss of accuracy between +10%/-10% in very heavy industrial areas.
  • Page 186 Perform the following when using the FX5-4DA-ADP: • Set the number of times of winding to “2 turns” within approximately 200 mm from the connectors of the power cable on the FX5-4DA-ADP side, and attach a ferrite core. (Ferrite core used in our test: E04SR401938 manufactured by SEIWA ELECTRIC MFG.

  • Page 187: Appendix 3 How To Use Analog Inputs Built In Cpu Module For Current Inputs

    Appendix 3 How to Use Analog Inputs Built in CPU Module for Current Inputs The analog input of the built-in analog can be used as current input (4 to 20 mA DC) for the FX5U CPU module. Method of using the FX5U CPU module for current inputs (4 to 20 mA DC) The FX5U CPU module is designed to handle only voltage inputs.

  • Page 188: Appendix 4 Precautions For Operating Ambient Temperature

    Appendix 4 Precautions for Operating Ambient Temperature This section describes precautions when the device is used at an operating ambient temperature below 0. Precaution when used at an operating ambient temperature below 0 • With some exceptions, the operating ambient temperature is -20 to 55 for the FX5 PLCs manufactured in June 2016 onwards.

  • Page 189: Appendix 5 I/O Module

    Appendix 5 I/O Module Product configuration There are various types of I/O module. They differ in supply voltage, number of input/output points, input form, output form and input/output connection type. I/O module Number of Power supply Input type Output type Input/output input/output points connection form...
  • Page 190 Output module : Sink, : Source Sink Source ■Extension cable type Model Input Output Input/output connection Type No. of Common wiring Type No. of Common wiring type points system points system ■Output extension/relay output type     FX5-8EYR/ES Relay Screw terminal block...
  • Page 191 ■Extension connector type Model Input Output Input/output connection Type No. of Common wiring Type No. of Common wiring type points system points system ■Input/output extension/sink input/output only FX5-C32ET/D 24 V DC Sink Transistor Sink Connector ■Input/output extension/sink and source input/sink output only FX5-C32ET/DS-TS 24 V DC Sink...

  • Page 192: Specifications

    Specifications The generic specifications are the same as those for the CPU module. (Page 30 Generic Specifications) Power supply specifications ■Input modules Item Specifications Voltage rating 24 V DC (supplied from 24 V DC service power supply or external power supply) 5 V DC (supplied from PLC) Current consumption (5 V DC) FX5-8EX/ES...
  • Page 193 ■Powered input/output module Item Specifications Voltage rating FX5-32E/E 100 to 240 V AC FX5-32E/D 24 V DC Allowable supply voltage range FX5-32E/E 85 to 264 V AC FX5-32E/D 16.8 to 28.8 V DC Rated frequency FX5-32E/E 50/60 Hz Allowable instantaneous power FX5-32E/E...
  • Page 194 External color, weight, accessories ■Input module/output module Item Specifications External color Munsell 0.6B7.6/0.2 Mass (weight) FX5-8E Approx. 0.2 kg FX5-16E Approx. 0.25 kg FX5-C16EX/, Approx. 0.1 kg FX5-C16EYT/ FX5-C32EX/, Approx. 0.15 kg FX5-C32EYT/ Accessories FX5-8E, Dust proof protection sheet FX5-16E FX5-C32EX/...
  • Page 195 Input specifications There is the simultaneous ON ratio of available PLC inputs or outputs with respect to the ambient temperature. For details, refer to Page 37 Input/Output Derating Curve Item Specifications No. of input points FX5-8EX/ES 8 points FX5-16EX/ES 16 points FX5-32E...
  • Page 196 Item Specifications Input circuit FX5-EX/ES, • When using 24 V DC service power supply for input module, input/output module and high-speed configuration FX5-32E, pulse input/output module FX5-16ER/ES, Sink input wiring Source input wiring FX5-16ET/E, CPU module CPU module FX5-C32EX/DS-TS, FX5-C32ET/D(SS)-TS Input module Input module •...
  • Page 197 Output specifications There is the simultaneous ON ratio of available PLC inputs or outputs with respect to the ambient temperature. For details, refer to Page 37 Input/Output Derating Curve ■Relay output Item Specifications No. of output points FX5-8EYR/ES 8 points FX5-16EYR/ES 16 points FX5-16ER/ES...
  • Page 198 Item Specifications Indication of output operation LED is lit when output is on • With FX5-C32EYT/D, the lower number/higher number order is switched with the DISP switch F/ • With FX5-C32ET/D, the input/output is switched with the DISP switch IN/OUT. Max.
  • Page 199 Item Specifications Connection type FX5-EYT/ESS, Screw terminal block (M3 screws) FX5-16ET/ESS, FX5-32ET/SS, FX5-16ET/ESS-H FX5-CEYT/DSS, Connector FX5-C32ET/DSS FX5-C32EYT/DSS-TS, Spring clamp terminal block FX5-C32ET/DSS-TS Output type Transistor/source output External power supply 5 to 30 V DC Output circuit insulation Photo-coupler insulation Indication of output operation LED is lit when output is on •...

  • Page 200: External Dimensions And Component Names

    External dimensions and component names Input module/output module ■Extension cable type (mounting hole pitch) Unit: mm Without cover 2-4.5 mounting holes External dimensions Model W: mm FX5-8EX/ES FX5-8EYR/ES, FX5-8EYT/ES, FX5-8EYT/ESS FX5-16EX/ES FX5-16EYR/ES, FX5-16EYT/ES, FX5-16EYT/ESS Part names Name Description Input display LED, output display LED Lit when input or output is on.
  • Page 201 ■Extension connector type • Connector type Unit: mm External dimensions Model W: mm FX5-C16EX/D, FX5-C16EX/DS 14.6 FX5-C16EYT/D, FX5-C16EYT/DSS FX5-C32EX/D, FX5-C32EX/DS 20.1 FX5-C32EYT/D, FX5-C32EYT/DSS Part names Name Description Extension connector Connector connected to extend modules PWR LED Indicates whether the input modules/output modules is powered or not. Lit: Powered Off: Not powered or hardware error I/O display LED...
  • Page 202 • Spring clamp terminal block type Unit: mm 19.7 External dimensions Model W: mm FX5-C32EX/DS-TS 20.1 FX5-C32EYT/D-TS, FX5-C32EYT/DSS-TS Part names Name Description Extension connector Connector connected to extend modules PWR LED Indicates whether the input modules/output modules is powered or not. Lit: Powered Off: Not powered or hardware error I/O display LED...
  • Page 203 Input/output module ■Extension cable type (mounting hole pitch) Unit: mm Without cover 2-4.5 mounting holes External dimensions Model W: mm FX5-16ER/ES, FX5-16ET/ES, FX5-16ET/ESS Part names Name Description Input display LED, output display LED Lit when input or output is on. POWER LED Indicates whether the input modules/output modules is powered or not.
  • Page 204 ■Extension connector type • Connector type Unit: mm External dimensions Model W: mm FX5-C32ET/D, FX5-C32ET/DSS 20.1 Part names Name Description Extension connector Connector connected to extend modules PWR LED Indicates whether the input/output modules are powered or not. Lit: Powered Off: Not powered or hardware error I/O display LED Lit when input or output is on.
  • Page 205 • Spring clamp terminal block type Unit: mm 19.7 External dimensions Model W: mm FX5-C32ET/DS-TS, FX5-C32ET/DSS-TS 20.1 Part names Name Description Extension connector Connector connected to extend modules PWR LED Indicates whether the input modules/output modules is powered or not. Lit: Powered Off: Not powered or hardware error Input display LED...
  • Page 206 Powered input/output module 2-4.5 mounting holes [5] [6] Unit: mm 140 (mounting hole pitch) (mounting hole pitch) [Without cover] [10] External dimensions Model W: mm FX5-32ER/ES, FX5-32ET/ES, FX5-32ET/ESS FX5-32ER/DS, FX5-32ET/DS, FX5-32ET/DSS Part names Name Description Extension connector cover (for preceding module) Cover for protecting the extension connector cover (for preceding module).
  • Page 207 High-speed pulse input/output module Unit: mm Without cover 2-4.5 mounting holes External dimensions Model W: mm FX5-16ET/ES-H, FX5-16ET/ESS-H Part names Name Description Input display LED, Output display LED Lit when input or output is on. POWER LED Indicates whether the input modules/output modules is powered or not. Lit: Powered Off: Not powered or hardware error Pullout tab...

  • Page 208: Terminal Layout

    Terminal layout Extension cable type FX5-8EX/ES FX5-8EYR/ES FX5-8EYT/ESS FX5-16ER/ES FX5-8EYT/ES FX5-16ET/ES FX5-16ET/ES-H FX5-16EX/ES FX5-16EYR/ES FX5-16EYT/ESS FX5-16ET/ESS FX5-16EYT/ES FX5-16ET/ESS-H Lower Lower Lower numbers numbers numbers Higher Higher Higher number number number FX5-32E/E FX5-32E/D S/S 0V FX5-32ER/ES, FX5-32ET/ES FX5-32ER/DS, FX5-32ET/DS COM0 COM1 COM2 COM3 COM0...
  • Page 209 Extension connector type FX5-C16EX/D FX5-C32EX/D FX5-C32EX/DS-TS FX5-C16EYT/D Input Input Output Input Notch Smaller Notch Notch numbers COM0 COM0       Input Input Larger numbers   FX5-C16EX/DS FX5-C32EX/DS FX5-C16EYT/DSS Input Output Input Notch Smaller Notch Notch numbers COM0 COM0...
  • Page 210 FX5-C32EYT/D FX5-C32EYT/D-TS FX5-C32ET/D FX5-C32ET/DS-TS Output Output Input Input Smaller Notch Notch numbers COM0 COM0 COM0 COM0     Output Output Output Output Larger numbers COM1 COM1 COM0 COM0 COM1 COM1 COM0 COM0     FX5-C32EYT/DSS FX5-C32EYT/DSS-TS FX5-C32ET/DSS FX5-C32ET/DSS-TS Output...

  • Page 211: Appendix 6 Connector Conversion Module

    Appendix 6 Connector Conversion Module Connector conversion modules are used to connect FX5 I/O modules (extension connector type) in FX5U systems. External dimensions and component names Unit: mm External dimensions Model W: mm FX5-CNV-IF 14.6 Part names Name Description Extension connector (for preceding module) Connector for connecting the supplied extension cable that connects to the preceding module (the CPU module side).

  • Page 212: Appendix 7 Sd Memory Card

    Appendix 7 SD Memory Card An SD memory card is installed in the CPU module to perform the following operation. • Operate using the project data in the SD memory card. • Storing data that is collected by the data logging function to the SD memory card. Part names This section describes the part names of the SD memory card.

  • Page 213: Insertion And Removal Of The Sd Memory Card

    Formatting To use any SD memory card in the CPU module, the card must be formatted. In the initial state after purchase, the SD memory card is not formatted. Insert the SD memory card to a CPU module and format the SD memory card using the engineering tool before use.

  • Page 214: Appendix 8 Terminal Module

    Appendix 8 Terminal Module Product configuration Terminal modules are used to convert connector-type I/O terminals into terminal blocks. By using terminal blocks (built-in element Option cable or type) dedicated to input or output, capturing of AC input signals user-created cable and format conversion into the relay/transistor/triac output can be performed.

  • Page 215: Specifications

    Specifications Exterior color, accessories Item Specifications Exterior color Munsell 0.08GY/7.64/0.81 Accessories Input/output number label, terminal block layout card Input specifications ■FX-16EX-A1-TB Item Specifications Input type AC input Input signal voltage 100 to 120 V AC +10% -15% 50/60 Hz Input signal current 4.7 mA/100 V AC 50 Hz 6.2 mA/110 V AC 60 Hz Input impedance...
  • Page 216 Output specifications ■Relay output (FX-16EYR-TB, FX-16EYR-ES-TB/UL) Item Specifications Output type Relay External voltage 250 V AC or less, 30 V DC or less Max. load Resistance load 2 A/point The total load current per common terminals (four points) should be 8 A or less. Inductive load 80 VA Min.
  • Page 217 ■Transistor/sink output (FX-16EYT-TB, FX-16EYT-ES-TB/UL) Item Specifications Output type Transistor/sink output External voltage 5 to 30 V DC Max. load Resistance load 0.5 A/point The total load current per common terminals (four points) should be 0.8 A or less. Inductive load 12 W/24 V DC ...
  • Page 218 ■Transistor/source output (FX-16EYT-ESS-TB/UL) Item Specifications Output type Transistor/source output External voltage 5 to 30 V DC Max. load Resistance load 0.5 A/point The total load current per common terminals (four points) should be 0.8 A or less. Inductive load 12 W/24 V DC ...
  • Page 219 ■Triac output (FX-16EYS-TB, FX-16EYS-ES-TB/UL) Item Specifications Output type Triac (SSR) External voltage 85 to 242 V AC Max. load Resistance load 0.3 A/point The total load current per common terminals (four points) should be 0.8 A or less. Inductive load 15 VA/100 V AC 36 VA/200 V AC Min.

  • Page 220: External Dimensions And Component Names

    External dimensions and component names • FX-16E-TB, FX-16E-TB/UL • FX-32E-TB, FX-32E-TB/UL • FX-16EX-A1-TB • FX-16EYR-TB, FX-16EYR-ES-TB/UL, FX-16EYT-TB, FX-16EYT-ES-TB/UL, FX-16EYT-ESS-TB/UL, FX-16EYS-TB, FX-16EYS-ES-TB/UL Unit: mm (inches) Name Description CN1 connector Connector for connecting input signal cables or output signal cables for CN1 CN2 connector Connector for connecting input signal cables or output signal cables for CN2 (FX-32E-TB and FX-32E-TB/UL only)

  • Page 221: Terminal Layout

    Terminal layout • FX-16E-TB, FX-16E-TB/UL Smaller numbers Larger numbers • FX-32E-TB, FX-32E-TB/UL Smaller numbers Larger numbers CN1 CN2 Smaller numbers Larger numbers • FX-16EX-A1-TB POWER Smaller numbers Larger numbers COM1 COM2 COM3 COM4 COM1 COM2 COM3 COM4 • FX-16EYR-TB, FX-16EYR-ES-TB/UL, FX-16EYT-TB, FX-16EYT-ES-TB/UL, FX-16EYT-ESS-TB/UL, FX-16EYS-TB, FX-16EYS-ES-TB/UL Smaller numbers Larger numbers COM1...

  • Page 222: Internal Circuit

    Internal circuit FX-16E-TB, FX-32E-TB 0 to 7 (Smaller numbers) 0 to 7 (Larger numbers) (20) (10) (19) (18) (17) (16) (15) (14) (13) (12) (11) (20) (10) (19) (18) (17) (16) (15) (14) (13) (12) (11) 0 to 7 (Smaller numbers) 0 to 7 (Larger numbers) *1 Replace this number with the one of the connected connector.
  • Page 223 FX-16E-TB/UL, FX-32E-TB/UL 0 to 7 (Smaller numbers) 0 to 7 (Larger numbers) (20) (10) COM0 (19) COM0 (18) (17) (16) (15) (14) (13) (12) (11) (20) (10) COM0 (19) COM0 (18) (17) (16) (15) (14) (13) (12) (11) 0 to 7 (Smaller numbers) 0 to 7 (Larger numbers) *1 Replace this number with the one of the connected connector.
  • Page 224 FX-16EX-A1-TB   (20) (10) (19) (18) Photocoupler Photocoupler (17) (16) (15) (14) (13) (12) (11) Photocoupler Photocoupler 0 to 3 4 to 7 0 to 3 4 to 7 COM1 COM2 COM3 COM4 COM1 COM2 COM3 COM4 0 to 7 Larger numbers 0 to 7 Smaller numbers FX-16EYR-TB ...
  • Page 225 FX-16EYR-ES-TB/UL   (20) (10) (19) (18) (17) (16) (15) (14) (13) (12) (11) 0 1 2 3 4 5 6 7 0 1 2 4 5 6 7 COM1 COM2 COM3 COM4 COM1 COM2 COM3 COM4 0 to 7 Smaller numbers 0 to 7 Larger numbers *1 Replace this number with the one of the connected connector.
  • Page 226 FX-16EYT-ES-TB/UL   (20) (10) Photo- (19) coupler k k (18) Photo- (17) coupler (16) (15) (14) (13) Photo- (12) coupler k k (11) Photo- coupler 0 to 7 Smaller numbers 0 to 7 Larger numbers 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7...
  • Page 227 FX-16EYS-TB   (20) (10) COM0 (19) COM0 k k (18) Photo- (17) Photo- thyristor (16) thyristor (15) (14) (13) (12) k k (11) Photo- Photo- thyristor thyristor 0 to 7 Smaller numbers 0 to 7 Larger numbers Surge absorbers are connected to each output. 0 1 2 3 4 5 6 7 0 1 2 3...

  • Page 228: Appendix 9 Precautions For Battery Transportation

    Appendix 9 Precautions for Battery Transportation When transporting lithium batteries, follow required transportation regulations. Batteries used in the FX5U CPU module are classified as follows. Control-subject product Built-in None (FX5U CPU modules do not include batteries when shipped from the factory.) Battery only (spare parts and optional parts) Model Battery type...

  • Page 229: Appendix 10Handling Of Batteries And Devices With Built-In Batteries In Eu Member States

    Appendix 10 Handling of Batteries and Devices with Built-in Batteries in EU Member States This section describes the precautions for disposing of waste batteries in EU member states and exporting batteries and/or devices with built-in batteries to EU member states. Disposal precautions In EU member states, there is a separate collection system for waste batteries.

  • Page 230: Appendix 11 Added And Changed Functions

    Appendix 11 Added and Changed Functions The functions added or changed with the CPU module and engineering tool, and the supported CPU modules' firmware version and engineering tool software version are given below. • The firmware version can be confirmed with module diagnostics (CPU diagnostics). Refer to Page 174 Module diagnostics (CPU diagnostics) for details on the module diagnostics (CPU diagnostics).

  • Page 231: Index

    INDEX ......27 .......27 BAT LED RD LED .

  • Page 232: Revisions

    2, 5 This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.

  • Page 233: Warranty

    WARRANTY Please confirm the following product warranty details before using this product. Gratis Warranty Term and Gratis Warranty 2. Onerous repair term after discontinuation of production Range If any faults or defects (hereinafter "Failure") found to Mitsubishi shall accept onerous product repairs for be the responsibility of Mitsubishi occurs during use of seven (7) years after production of the product is the product within the gratis warranty term, the...

  • Page 234: Trademarks

    TRADEMARKS   Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Ethernet is a trademark of Xerox Corporation. Anywire and ANYWIREASLINK is a registered trademark of the Anywire Corporation. ...
  • Page 236 Manual number: JY997D55301G Model: FX5U-U-HW-E Model code: 09R536 When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission. HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN Specifications are subject to change without notice.

Table of Contents