Power Supply Specifications; Ac Power Supply Type - Mitsubishi Electric MELSEC iQ-F FX6U Hardware User Manual

2.2

Power Supply Specifications

The CPU module power supply specifications are explained below.
For the consumption current of extension modules, refer to Page 47 PRODUCT LIST or manuals of each extension
module.

AC power supply type

Item
Rated voltage
Allowable supply voltage range
Frequency rating
Allowable instantaneous power failure time
Power fuse
Rush current
*1
Power consumption
24 V DC service power
*2
supply capacity
5 V DC built-in power
supply capacity
*1 This item shows value when all 24 V DC service power supplies are used in the maximum configuration connectable to the CPU
module. (The current of the input circuit is included.)
*2 When I/O modules are connected, they consume current from the 24 V DC service power supply.
For details on the 24 V DC service power supply, refer to Page 69 Limitation on Current Consumption.
*3 The value in [] is capacity of 24 V DC service power supply in the case where operating ambient temperature is lower than 0.
The following shows the power failure detection time of the AC power supply type.
AC power supply
(AC detection)
SM8000:
SM8007:
SM8008:
2 SPECIFICATIONS
32
2.2 Power Supply Specifications
Specifications
100 to 240 V AC
85 to 264 V AC
50/60 Hz
Operation can be continued upon occurrence of instantaneous power failure for 10 ms or less.
When the supply voltage is 200 V AC, the time can be change to 10 to 100 ms by editing the user program.
FX5U-32M/E 250 V, 3.15 A Time-lag fuse
FX5U-64M/E, 250 V, 5 A Time-lag fuse
FX5U-80M/E
FX5U-32M/E 25 A max. 5 ms or less/100 V AC
50 A max. 5 ms or less/200 V AC
FX5U-64M/E, 30 A max. 5 ms or less/100 V AC
FX5U-80M/E 60 A max. 5 ms or less/200 V AC
FX5U-32M/E 30 W
FX5U-64M/E 40 W
FX5U-80M/E 45 W
FX5U-32M/E 400 mA [300 mA
module )
480 mA [380 mA
FX5U-64M/E 600 mA [300 mA
module)
740 mA [440 mA
FX5U-80M/E 600 mA [300 mA
module)
770 mA [470 mA
FX5U-32M/E 900 mA
FX5U-64M/E, 1100 mA
FX5U-80M/E
t
*1
Approx.
RUN monitor
3 ms
Momentary
power failure
detection
Power failure
detected
SD8008
10 to 13 ms
*1 t: time (as a guideline)
100 V AC: 0 ms to approximately 60 ms
200 V AC: 0 ms to approximately 100 ms
*3
] (Supply capacity when 24 V DC service power supply is used for input circuit of the CPU
*3
] (Supply capacity when external power supply is used for input circuit of the CPU module)
*3
] (Supply capacity when 24 V DC service power supply is used for input circuit of the CPU
*3
] (Supply capacity when external power supply is used for input circuit of the CPU module)
*3
] (Supply capacity when 24 V DC service power supply is used for input circuit of the CPU
*3
] (Supply capacity when external power supply is used for input circuit of the CPU module)
1 scan time
Power failure
detection time