Mitsubishi Electric MELSEC iQ-F FX6U Hardware User Manual page 110

Wire end treatment
Crimp terminal size differs depending on terminal screw size and wiring methods used.
• Use crimp terminals of the following sizes.
■M3 terminal screw
• When a single wire is connected to a single terminal
6.2 mm or less
6.2 mm or less
<Reference>
Manufacturer
JST Mfg. Co., Ltd.
• When two wire are connected to a single terminal
6.2 mm or less
6.2 mm or less
<Reference>
Manufacturer
JST Mfg. Co., Ltd.
■M3.5 terminal screw
• When a single wire is connected to a single terminal
6.8 mm or less
6.8 mm or less
• When two wires are connected to a single terminal
6.8 mm or less
6.8 mm or less
6 WIRING
108
6.2 Cable Connecting Procedure
3.2 Terminal screw Crimp terminal
3.2
Terminal
Model
FV1.25-B3A
FV2-MS3
3.2
Terminal screw Crimp terminal
6.3 mm or more
3.2
Terminal
6.3 mm or more
Model
FV1.25-B3A
3.7
Terminal screw Crimp terminal
3.7
Terminal
3.7
Terminal screw
6.0 mm or more
3.7
Terminal
6.0 mm or more
Supported standards
UL Listed
Supported standards
UL Listed
Crimp terminal
Crimp tool
YA-1
(JST Mfg. Co., Ltd.)
Crimp tool
YA-1
(JST Mfg. Co., Ltd.)