In Charger; Calls - Mitel DT690 User Manual

User Manual
Cordless Telephone DT690 With Bluetooth
Rename System
It is possible to change the name of the system in the telephone.
1 Select "Rename System".
2 Select system to rename.
3 Enter new name.
4 Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
Note: This is used in combination with system set to be "Automatic", see
on page 36.
1 Select "Priority".
2 Change the priority if needed by selecting "Up" or "Down". The priority will be
saved when "Back" is selected.
8.1.4

In charger

Redirect Calls and Messages when placed in Charger
Calls can be redirected to another extension when the cordless telephone is placed in a
charger. The function is automatically cancelled when the phone is removed from the
charger.
1 Select "In charger".
2 Select "Redirect".
Switch off while charging
When the cordless telephone is placed in the charger it can be switched off while it is
charging. When it is removed from the charger it will switch on again.
1 Select "In charger".
2 Select "Switch off".
Deactivate the charging mode
1 Select "In charger".
2 Select "No action".
3 Press "Select" to save the setting.
8.2

Calls

1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on
the Navigation key.
2 Select
"Select".
2008-06-12/ Ver. PA15
PRELIMINARY
in the menu, and press the confirmation button or the Soft key
TD 92474GB
Change System
37