Miscellaneous - EverFocus EMV400S FHD User Manual

6.9.7

Miscellaneous

You can upgrade the latest firmware, restore the factory default settings to the mobile DVR,
upload / save the mobile DVR configuration settings from / to the USB or change the language
in this setup menu.
Firmware
Current Firmware Version: Shows the current firmware version of the mobile DVR.
Upgrade: Click to upgrade the latest firmware. Note you will need to restore the firmware file
to the USB flash device and then connect the USB flash device to the mobile DVR.
Configurations
Load Factory Default: Click to restore the mobile DVR to factory default settings. The User
Account, Network IP Settings, and Time settings will not be affected.
Load From USB: Click to upload the mobile DVR configurations restored in the USB flash device.
Save To USB: Click to save the mobile DVR configurations to the USB flash device.
Language: Choose which language the mobile DVR uses.
EMV400S FHD / EMV400SSD Mobile DVR
135