Fast Ma To Ras# Delay :2 Clks; Sdram (Cas Lat/Ras-To-Cas):3/3; Sdram Speculative Read :Disabled; System Bios Cacheable :Disabled - MSI MS-5148 User Manual

Fast MA to RAS# Delay
The settings are 1 Clks or 2 Clks(default). During 1T One bus Clock
is allowed, while 2T Two Bus Clock is allowed. MA address setup time to
RAS assertion. This is also dependent on DRAM Timing.
SDRAM (CAS Lat/RAS-to-CAS)
The settings are 3/3 or 2/2. This option is for SDRAM CAS latency
Time and RAS# to CAS# delay time. The default setting is 3/3.
SDRAM Speculative Read
The settings are enable or disable. If you only use One Bank for
SDRAM and there's no EDO or FP mix together, the setting is Enable. If
there two bank use by SDRAM it will automatically be set to disable. The
default setting is enable.
System BIOS Cacheable
By choosing Disabled (default) the system BIOS will be shadowed
into DRAM only. Enabled will have the system BIOS shadowed and
cacheable.

Video RAM Cacheable

Same as system BIOS Cacheable
8-bit I/O recovery time: 1/2/3/4/5/6/7/NA
16-bit I/O recovery time: 1/2/3/NA
Choose the recovery time for 8-bit and 16-bit I/O cycles respectively.
Note: NA is not available and so the recovery time of 3.5 SYSCLK is
inserted.
3-18