Onboard Serial Port 1 - MSI MS-5148 User Manual

On-Chip Secondary PCI IDE
Enabled/Disabled
PCI Slot IDE 2nd Channel
Enabled/Disabled
Onboard FDD Controller
Enabled/Disabled

Onboard Serial Port 1

Disabled/(3F8/IRQ4)/(2F8/IRQ3)/ (3E8/IRQ4)/(2E8/IRQ3)
The system provides for a On-Board On-
Chipset PCI IDE controller that supports Dual
Channel IDE (Primary and Secondary). A
maximum of 4 IDE devices can be supported. If
the user install the Off-Board PCI IDE
controller (i.e. add-on cards), the user must
choose which channels will be disabled. This
will depend on which channel will be used for
the Off-Board PCI IDE add-on card.
Choosing Enabled will allow the system to
access the 2nd IDE channel without a device
driver. If the Off-Board PCI IDE add-on card is
installed the 2nd IDE channel will need to be
used.
The system has an on-board Super I/O chip
with a FDD controller that supports 2 FDDs for
360K/720K/1.2M/1.44M/2.8M.Choose "Ena
bled" to use the on-board FDD controller for
accessing the FDD. Otherwise choose "Disa
bled" to use the off-board FDD controller.
3-33