MSI MS-5148 User Manual page 13

2.1-5 CPU Fan Power Connector: JFAN
This connector supports CPU cooling fan with +12V. It supports both two
and three pin head connector. When connecting the wire to the connector,
always take note that the red wire is the positive and should be connected to
the +12V. If the system is in suspend mode, the fan will stop. You can change
this setup on the Power Management Setup in the BIOS.
JP2
JGS
JRMS1
JGL
JPF
Recommended CPU cooling fan specification:
- Metallic Clip
- RPM 5000
- CFM 10
- +12V
- 52x52x10mm
- Ball Bearing
Note: Always consult vendor for
proper CPU cooling fan.
JV1
BATT
+
INTEL
2032
FW82371AB
BIOS
JBAT
2-8
IR
INTEL
FW82439TX
G N D
JFAN
JV3
JV4
JV5
JV6
JRMS2
+12V
G N D
JFAN
Connector