Planet IGS-5225-16T4S User Manual page 229

 Hop Limit

ICMP Parameters
Object

ICMP Type Filter

ICMP Type Value

ICMP Code Filter

ICMP Code Value

TCP/UDP Parameters
Object

TCP/UDP Source Filter
usage of bitmask, if the binary bit value is "0", it means this bit is "don't-care".
The real matched pattern is [sipv6_address & sipv6_bitmask] (last 32 bits). For
example, if the SIPv6 address is 2001::3 and the SIPv6 bitmask is
0xFFFFFFFE(bit 0 is "don't-care" bit), then SIPv6 address 2001::2 and 2001::3
are applied to this rule.
Specify the hop limit settings for this ACE.
zero: IPv6 frames with a hop limit field greater than zero must not be able
■
to match this entry.
non-zero: IPv6 frames with a hop limit field greater than zero must be able
■
to match this entry.
Any: Any value is allowed ("don't-care").
■
Description
Specify the ICMP filter for this ACE.
Any: No ICMP filter is specified (ICMP filter status is "don't-care").
■
Specific: If you want to filter a specific ICMP filter with this ACE, you can
■
enter a specific ICMP value. A field for entering an ICMP value appears.
When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
value.
Specify the ICMP code filter for this ACE.
Any: No ICMP code filter is specified (ICMP code filter status is
■
"don't-care").
Specific: If you want to filter a specific ICMP code filter with this ACE, you
■
can enter a specific ICMP code value. A field for entering an ICMP code
value appears.
When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
code value.
Description
Specify the TCP/UDP source filter for this ACE.
229
User's Manual of IGS-5225 series