IGS-5225-24P4S
Dual 48 to 56V DC power input, redundant power with polarity reverse protect function
-
Active-active redundant power failure protection
-
Backup of catastrophic power failure on one supply
-
Fault tolerance and resilience
19-inch rack-mountable design
IP30 metal case protection
Supports EFT protection for 6000V DC power and 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
Digital Input & Digital Output
2 Digital Input (DI)
2 Digital Output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
Supports maximum 32 static routes and route summarization
Layer 2 Features
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
Storm control support
-
Broadcast and unknown unicast
Supports VLAN
-
IEEE 802.1Q tagged VLAN
-
Up to 255 VLANs groups, out of 4095 VLAN IDs
-
Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
-
Private VLAN Edge (PVE)
-
Protocol-based VLAN
-
MAC-based VLAN
-
Voice VLAN
Supports Spanning Tree Protocol
-
IEEE 802.1D Spanning Tree Protocol (STP)
-
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
-
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
-
BPDU Guard
Supports Link Aggregation
-
802.3ad Link Aggregation Control Protocol (LACP)
-
Cisco ether-channel (static trunk)
-
Maximum 14 trunk groups, with 8 ports for each trunk
User's Manual of IGS-5225 series
(IGS-5225-20T4C2X)
17