Before Connecting Cables - Samsung OH75F User Manual

Before connecting cables

― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2
Silicone-Bar
Unfasten the screws, then remove the cover.
Remove the appropriate silicon bar for the
thickness of the cable to connect.
Different hole sizes and corresponding cable
thickness for each:
― 7 Ø hole x 1: Insert the 7 Ø cable
― 5.5 Ø hole x 6 : Insert the 5.5 Ø cable
― 3 Ø hole x 2 : Insert the 3 Ø cable
― 8.5 Ø hole x 1 : Insert the 8.5 Ø cable
3
4
5
6
Insert and keep the removed Silicone-Bar in
the marked area to ensure it is not lost.
Insert the appropriate cable into the hole
from which the Silicone-Bar was removed.
The cable should be connected as shown.
Close the cover, then fasten the screws.
― After all the cables are connected, make
sure to close the cover and fasten the
screws to ensure it is water tight.
― Recommended torque :10 - 12 kgf.cm
34